Amedeo Smart

Free Medical Literature Service

 

Amedeo

Dental Implants
  Free Subscription

Articles published in
J Prosthet Dent
    April 2024
  1. ALQUTAIBI AY, Algabri R, Ibrahim WI, Alhajj MN, et al
    Dental implant planning using artificial intelligence: A systematic review and meta-analysis.
    J Prosthet Dent. 2024 Apr 22:S0022-3913(24)00227.
    >> Share

  2. ENGELSCHALK M, Al Hamad KQ, Mangano R, Smeets R, et al
    Corrigendum to: 'Dental implant placement with immersive technologies: A preliminary clinical report of augmented and mixed reality applications' [The Journal of Prosthetic Dentistry (2024)].
    J Prosthet Dent. 2024 Apr 18:S0022-3913(24)00216.
    >> Share

  3. SU X, Wang G, Zhao B, Wang X, et al
    Maxillary sinus floor elevation for implant placement assisted by an autonomous dental implant robotic system: A clinical report.
    J Prosthet Dent. 2024 Apr 15:S0022-3913(24)00241.
    >> Share

  4. GAIKWAD A, Parizi MK, Winkel A, Stiesch M, et al
    Osteoblast cell behavior on polyetheretherketone dental implant surfaces treated with different grit size aluminum oxide particles: An in vitro analysis.
    J Prosthet Dent. 2024 Apr 8:S0022-3913(24)00148.
    >> Share

  5. ANWAR H, Azer A, AboElHassan RG
    Influence of a specially designed geometric device and modified scan bodies on the accuracy of a maxillary complete arch digital implant scan: An in vitro study.
    J Prosthet Dent. 2024;131:683.
    >> Share

  6. ZOU J, Li L
    An indirect method of verifying passive fit of complete arch implant-supported frameworks fabricated from photogrammetry scans.
    J Prosthet Dent. 2024;131:756-759.
    >> Share

  7. PATIL PG, Seow LL, Uddanwadikar R, Pau A, et al
    Different implant diameters and their effect on stress distribution pattern in 2-implant mandibular overdentures: A 3D finite element analysis study.
    J Prosthet Dent. 2024;131:675-682.
    >> Share

  8. PEI X, Liu X, Iao S, Ma F, et al
    Accuracy of 3 calibration methods of computer-assisted dynamic navigation for implant placement: An in vitro study.
    J Prosthet Dent. 2024;131:668-674.
    >> Share

  9. DAOU EE
    Effect of lamination layer thickness and abutment preparation on the fit of Co-Cr multi-unit prostheses fabricated by additive manufacturing: An in vitro study.
    J Prosthet Dent. 2024;131:652-657.
    >> Share

  10. GAMA LT, Bezerra AP, Schimmel M, Rodrigues Garcia RCM, et al
    Clinical performance of polymer frameworks in dental prostheses: A systematic review.
    J Prosthet Dent. 2024;131:579-590.
    >> Share

  11. CALAZANS NETO JV, Kreve S, Valente MLDC, Reis ACD, et al
    Protein absorption on titanium surfaces treated with a high-power laser: A systematic review.
    J Prosthet Dent. 2024;131:591-597.
    >> Share

  12. KURIAN N, Varghese KG, Daniel S, Varghese VS, et al
    Are YouTube videos on complete arch fixed implant-supported prostheses useful for patient education?
    J Prosthet Dent. 2024;131:684-688.
    >> Share

    March 2024
  13. KHAN M, Javed F, Haji Z, Ghafoor R, et al
    Comparison of the positional accuracy of robotic guided dental implant placement with static guided and dynamic navigation systems: A systematic review and meta-analysis.
    J Prosthet Dent. 2024 Mar 14:S0022-3913(24)00130.
    >> Share

  14. ENGELSCHALK M, Al Hamad KQ, Mangano R, Smeets R, et al
    Dental implant placement with immersive technologies: A preliminary clinical report of augmented and mixed reality applications.
    J Prosthet Dent. 2024 Mar 12:S0022-3913(24)00141.
    >> Share

  15. SINSAREEKUL C, Saengthong-Aram P, Limpuangthip N
    Survival, complications, and patient-reported outcomes of endodontically treated teeth versus dental implant-supported prostheses: A systematic review.
    J Prosthet Dent. 2024 Mar 4:S0022-3913(24)00121.
    >> Share

  16. JIA P, Yang J
    Biofilm accumulation on complete arch subperiosteal implant-supported prostheses: Effect of pontic type.
    J Prosthet Dent. 2024;131:478.
    >> Share

  17. CONEJO J, Yoo TH, Atria PJ, Fraiman H, et al
    In vitro comparative study between complete arch conventional implant impressions and digital implant scans with scannable pick-up impression copings.
    J Prosthet Dent. 2024;131:475.
    >> Share

  18. SETH C, Bawa A, Gotfredsen K
    Digital versus conventional prosthetic workflow for dental students providing implant-supported single crowns: A randomized crossover study.
    J Prosthet Dent. 2024;131:450-456.
    >> Share

  19. LIU Q, Liu Y, Chen D, Wu X, et al
    Placement accuracy and primary stability of implants in the esthetic zone using dynamic and static computer-assisted navigation: A retrospective case-control study.
    J Prosthet Dent. 2024;131:427-435.
    >> Share

  20. ALFAIFI MA, Wadhwani C, Schwedhelm ER, Kattadiyil MT, et al
    Evaluating the effect of the protector cap for castable implant abutments on reverse tightening values.
    J Prosthet Dent. 2024;131:476.
    >> Share

  21. CHEN S, Li R, Wu Z, Wang J, et al
    An implant-supported overdenture for a mandibular defect after tumor resection guided by 3-dimensional finite element analysis: A clinical report.
    J Prosthet Dent. 2024;131:531-536.
    >> Share

  22. REARY JA, Katsavochristou A, Powers JM, Kiat-Amnuay S, et al
    Effect of surface pretreatment and artificial aging on the retention of lithium disilicate crowns cemented to zirconia implant abutments.
    J Prosthet Dent. 2024;131:459-467.
    >> Share

  23. SINGTHONG W, Serichetaphongse P, Chengprapakorn W
    A randomized clinical trial on the accuracy of guided implant surgery between two implant-planning programs used by inexperienced operators.
    J Prosthet Dent. 2024;131:436-442.
    >> Share

  24. DE HOLANDA CAVALCANTI PEREIRA , de Oliveira Limirio JPJ, Cavalcanti do Egito Vasconcelos B, Pellizzer EP, et al
    Mechanical behavior of titanium and zirconia abutments at the implant-abutment interface: A systematic review.
    J Prosthet Dent. 2024;131:420-426.
    >> Share

    February 2024
  25. GODANI A, Iyer J, Nadgere J, Mohite A, et al
    Impact of immediate interim restoration on peri-implant tissues around immediately placed single dental implants in the esthetic region: A systematic review and meta-analysis.
    J Prosthet Dent. 2024 Feb 13:S0022-3913(24)00045.
    >> Share

  26. SANTHAVEESUK P, Serichetaphongse P, Kiat-Amnuay S
    Microwave disinfection of facial silicone prostheses, part 2: Mechanical properties.
    J Prosthet Dent. 2024;131:340.
    >> Share

  27. OZCIVELEK T, Basmaci F, Turgut B, Akbulut K, et al
    Perception of color mismatch or conspicuous marginal adaptation in extraoral prostheses with eye-tracking.
    J Prosthet Dent. 2024;131:332-339.
    >> Share

  28. PATIL PG, Seow LL, Uddanwadikar R, Pau A, et al
    Crestal strain of two-implant mandibular overdentures with implants placed at different positions: An in vitro 3D printed simulation study.
    J Prosthet Dent. 2024;131:281.
    >> Share

  29. ATSU S, Erol U
    Marginal fit and fracture resistance of polyetheretherketone, zirconia, and titanium implant-supported prosthesis frameworks for a partially edentulous arch after thermomechanical aging.
    J Prosthet Dent. 2024;131:273-280.
    >> Share

  30. KO KH, Park JH, Park CJ, Cho LR, et al
    Response to Letter to the Editor regarding, "Technique to retrieve implant abutment fragments".
    J Prosthet Dent. 2024;131:358-359.
    >> Share

  31. KLES P, Kles K, Ben-Gal G
    Response to comments on "Number of consecutive procedures after endodontic treatment to extraction: A 28-year retrospective study".
    J Prosthet Dent. 2024;131:355.
    >> Share

  32. ZHANG WT, Yang F
    Letter to the Editor regarding "Technique to retrieve implant abutment fragments" by Lee JH, et al.
    J Prosthet Dent. 2024;131:356-357.
    >> Share

  33. ADNAN N, Khan FR
    Comments on "Number of consecutive procedures after endodontic treatment to extraction: A 28-year retrospective study".
    J Prosthet Dent. 2024;131:354.
    >> Share

  34. JANG G, Kim SK, Heo SJ, Koak JY, et al
    Fit analysis of stereolithography-manufactured three-unit resin prosthesis with different 3D-printing build orientations and layer thicknesses.
    J Prosthet Dent. 2024;131:301-312.
    >> Share

  35. HWANG JY, Yoon HI
    Comparative analysis of intaglio surface trueness of cement-retained implant-supported prostheses generated by a cast-free digital workflow and a three-dimensionally printed cast workflow.
    J Prosthet Dent. 2024;131:272.
    >> Share

  36. MOORTHY A, Aljudaibi S, Donnelly-Swift E, Polyzois I, et al
    An in vitro evaluation of 2 methods for retrieving fractured abutment screw fragments from the intaglio of 4 different implant systems.
    J Prosthet Dent. 2024;131:282-290.
    >> Share

  37. RUTKUNAS V, Dirse J, Kules D, Mischitz I, et al
    Misfit simulation on implant prostheses with different combinations of engaging and nonengaging titanium bases. Part 2: Screw resistance test.
    J Prosthet Dent. 2024;131:262-271.
    >> Share

  38. SCHNUTENHAUS S, Edelmann C, Wetzel M, Luthardt RG, et al
    Influence of the macrodesign of an implant and the sleeve system on the accuracy of template-guided implant placement: A prospective clinical study.
    J Prosthet Dent. 2024;131:212-219.
    >> Share

  39. GIRUNDI ALG, Ribeiro MCO, Vargas-Moreno VF, Borges GA, et al
    Patient-reported outcome measures and clinical performance of implant-retained mandibular overdentures with stud and ball attachments: A systematic review and meta-analysis.
    J Prosthet Dent. 2024;131:197-211.
    >> Share

  40. CHEN Z, Liu Y, Xie X, Deng F, et al
    Influence of bone density on the accuracy of artificial intelligence-guided implant surgery: An in vitro study.
    J Prosthet Dent. 2024;131:254-261.
    >> Share

  41. XIE C, Fang T, Wang Y, Yu H, et al
    A digital workflow for the fabrication of an immediate implant-supported interim restoration.
    J Prosthet Dent. 2024;131:180-186.
    >> Share

    January 2024
  42. GAIKWAD A, Rachh P, Raut K
    Critical evaluation of YouTube videos regarding the all-on-4 dental implant treatment concept: A content-quality analysis.
    J Prosthet Dent. 2024 Jan 11:S0022-3913(23)00821.
    >> Share

  43. DASHTI M, Londono J, Ghasemi S, Tabatabaei S, et al
    Evaluation of accuracy of deep learning and conventional neural network algorithms in detection of dental implant type using intraoral radiographic images: A systematic review and meta-analysis.
    J Prosthet Dent. 2024 Jan 3:S0022-3913(23)00812.
    >> Share

  44. RATNA NAG V, Ramanathan M, Puppala S, Roy M, et al
    Straightforward techniques for selecting and organizing multiunit abutment prosthetic components.
    J Prosthet Dent. 2024;131:172-174.
    >> Share

  45. BI Y, Wei H
    Fully digital workflow for the rehabilitation of a total nasal defect with a prosthesis.
    J Prosthet Dent. 2024;131:167-171.
    >> Share

  46. GOMEZ-POLO M, Sallorenzo A, Ortega R, Gomez-Polo C, et al
    Influence of implant angulation and clinical implant scan body height on the accuracy of complete arch intraoral digital scans.
    J Prosthet Dent. 2024;131:119-127.
    >> Share

  47. YILMAZ H, Arinc H, Cakmak G, Atalay S, et al
    Effect of scan pattern on the scan accuracy of a combined healing abutment scan body system.
    J Prosthet Dent. 2024;131:110-118.
    >> Share

    December 2023
  48. ALQUTAIBI AY, Algabri RS, Elawady D, Ibrahim WI, et al
    Advancements in artificial intelligence algorithms for dental implant identification: A systematic review with meta-analysis.
    J Prosthet Dent. 2023 Dec 28:S0022-3913(23)00783.
    >> Share

  49. CHEN D, Chen J, Wu X, Chen Z, et al
    Prediction of primary stability via the force feedback of an autonomous dental implant robot.
    J Prosthet Dent. 2023 Dec 6:S0022-3913(23)00755.
    >> Share

  50. GIGLIO GD, Giglio AB
    Achieving optimal implant esthetics using a team approach: Part 2 treatment options, treatment coordination, and integration of digital technology.
    J Prosthet Dent. 2023;130:805-806.
    >> Share

  51. AZPIAZU-FLORES FX, Mata-Mata SJ, Lee DJ
    Detection of mandibular flexure with a dental plaster verification device: A clinical report with video recording.
    J Prosthet Dent. 2023;130:807-810.
    >> Share

  52. ASSAF A, Saad M, Hijawi S
    Use of narrow-diameter implants in the posterior segments of the jaws: A retrospective observational study of 2 to 11 years.
    J Prosthet Dent. 2023;130:840-848.
    >> Share

  53. YANG Q, Guan X, Wang B, Zhang D, et al
    Implant survival rate and marginal bone loss with the all-on-4 immediate-loading strategy: A clinical retrospective study with 1 to 4 years of follow-up.
    J Prosthet Dent. 2023;130:849-857.
    >> Share

    November 2023
  54. FAVERANI LP, Rios BR, Santos AMS, Mendes BC, et al
    Predictability of single versus double-barrel vascularized fibula flaps and dental implants in mandibular reconstructions: A systematic review and meta-analysis of prospective studies.
    J Prosthet Dent. 2023 Nov 15:S0022-3913(23)00686.
    >> Share

  55. MANDOURAH H, Houssein Ali HS, Li R, Mozayen AA, et al
    Effect of mastication load on retention force of custom-made LOCATOR abutments manufactured for angled implants: An in vitro study.
    J Prosthet Dent. 2023;130:740.
    >> Share

  56. LANG LK, Karl M, Klar V
    Evaluation of different debridement strategies for implant-abutment connections: An in vitro study.
    J Prosthet Dent. 2023;130:738.
    >> Share

  57. GIGLIO GD, Giglio AB
    Achieving optimal implant esthetics using a team approach Part 1 a review of evidence-based criteria in implant treatment.
    J Prosthet Dent. 2023;130:661-662.
    >> Share

  58. BHUMPATTARACHAI S, Kan JYK, Goodacre CJ, Swamidass RS, et al
    Effects of cyclic loading on loss of abutment screw torque of angled screw channel single implant crowns on narrow diameter implants.
    J Prosthet Dent. 2023;130:741.
    >> Share

  59. STRAZZI-SAHYON HB, Bergamo ETP, Gierthmuehlen PC, Lopes ACO, et al
    In vitro assessment of the effect of luting agents, abutment height, and fatigue on the retention of zirconia crowns luted to titanium base implant abutments.
    J Prosthet Dent. 2023;130:739.
    >> Share

  60. JEONG SH, Kim S, Seong YW, Chang JS, et al
    Implant-retained overdenture delivery in 2 visits with a digital workflow.
    J Prosthet Dent. 2023;130:663-667.
    >> Share

  61. BORGES GA, Codello DJ, Del Rio Silva L, Dini C, et al
    Factors and clinical outcomes for standard and mini-implants retaining mandibular overdentures: A systematic review and meta-analysis.
    J Prosthet Dent. 2023;130:677-689.
    >> Share

  62. ZHU N, Liu J, Ma T, Zhang Y, et al
    A fully digital workflow for prosthetically driven alveolar augmentation with intraoral bone block and implant rehabilitation in an atrophic anterior maxilla.
    J Prosthet Dent. 2023;130:668-673.
    >> Share

  63. KESAR N, Weigl P, Nentwig GH, Krebs M, et al
    Prevalence and risk of peri-implant diseases based on the type of prosthetic restoration: A retrospective study after 17 to 23 years.
    J Prosthet Dent. 2023;130:690-697.
    >> Share

  64. FENG Y, Yao Y, Yang X
    Effect of a dynamic navigation device on the accuracy of implant placement in the completely edentulous mandible: An in vitro study.
    J Prosthet Dent. 2023;130:731-737.
    >> Share

  65. YILMAZ B, Guo X, Schimmel M, Abou-Ayash S, et al
    Effect of industrial scanner and framework material interaction on the marginal gaps of CAD-CAM complete arch implant frameworks.
    J Prosthet Dent. 2023;130:723-730.
    >> Share

    October 2023
  66. THOMKOVA B, Marcian P, Borak L, Joukal M, et al
    Biomechanical performance of dental implants inserted in different mandible locations and at different angles: A finite element study.
    J Prosthet Dent. 2023 Oct 31:S0022-3913(23)00690.
    >> Share

  67. NETO JVC, Teixeira ABV, Candido Dos Reis A
    Hydroxyapatite coatings versus osseointegration in dental implants: A systematic review.
    J Prosthet Dent. 2023 Oct 14:S0022-3913(23)00631.
    >> Share

  68. NGUYEN O, Lee SJ, Lee JD
    Influence of varying titanium base abutment heights on retention of zirconia restorations: An in vitro study.
    J Prosthet Dent. 2023;130:604.
    >> Share

  69. JUNG BY, Park WS, Woo CW, Jeong SA, et al
    Zirconia-veneered polyetherketoneketone frameworks of implant-supported complete arch fixed dental prostheses: A report on 5 patients.
    J Prosthet Dent. 2023;130:419-433.
    >> Share

  70. YAN Y, Lin X, Yue X, Geng W, et al
    Accuracy of 2 direct digital scanning techniques-intraoral scanning and stereophotogrammetry-for complete arch implant-supported fixed prostheses: A prospective study.
    J Prosthet Dent. 2023;130:564-572.
    >> Share

  71. CIFTCI G, Somay SD, Ozcan I, Ozcelik TB, et al
    Prosthetic complications with mandibular bar-retained implant overdentures having distal attachments and metal frameworks: A 2- to 12-year retrospective analysis.
    J Prosthet Dent. 2023;130:573-580.
    >> Share

  72. GARCIA-SALA BONMATI F, Perez-Barquero JA, Ilzarbe Ripoll LM, Labaig Rueda C, et al
    An additively manufactured, magnetically retained, and stackable implant surgical guide: A dental technique.
    J Prosthet Dent. 2023;130:444-452.
    >> Share

  73. BORGES GA, Dini C, Medeiros MMD, Rodrigues Garcia RCM, et al
    Funding assistance and global productivity in the field of implant overdentures: A bibliometric analysis of 35 years.
    J Prosthet Dent. 2023;130:553-563.
    >> Share

    September 2023
  74. TIRYAKI B, Ozdogan A, Guller MT, Miloglu O, et al
    Dental implant brand and angle identification using deep neural networks.
    J Prosthet Dent. 2023 Sep 14:S0022-3913(23)00492.
    >> Share

  75. HUNG CCU, Costa RC, Pereira G, Abdo VL, et al
    Oral microbial colonization on titanium and polyetheretherketone dental implant healing abutments: An in vitro and in vivo study.
    J Prosthet Dent. 2023 Sep 14:S0022-3913(23)00538.
    >> Share

  76. SUKOTJO C, Bertucci DE, Patel JY, Yuan JC, et al
    Evaluating augmented reality e-typodont to improve a patient's dental implant health literacy.
    J Prosthet Dent. 2023 Sep 13:S0022-3913(23)00539.
    >> Share

  77. VINNAKOTA DN, Kamatham R, Nagaraj E, Reddy PS, et al
    Is dynamic computer-assisted surgery more accurate than the static method for dental implant placement? A systematic review and meta-analysis.
    J Prosthet Dent. 2023 Sep 8:S0022-3913(23)00493.
    >> Share

  78. KONG HJ, Yoo JY, Lee JH, Eom SH, et al
    Performance evaluation of deep learning models for the classification and identification of dental implants.
    J Prosthet Dent. 2023 Sep 5:S0022-3913(23)00467.
    >> Share

  79. POOVARODOM P, Rungsiyakull C, Suriyawanakul J, Li Q, et al
    Effect of gingival height of a titanium base on the biomechanical behavior of 2-piece custom implant abutments: A 3-dimensional nonlinear finite element study.
    J Prosthet Dent. 2023;130:380.
    >> Share

  80. UNKOVSKIY A, Spintzyk S, Kiemle T, Roehler A, et al
    Trueness and precision of skin surface reproduction in digital workflows for facial prosthesis fabrication.
    J Prosthet Dent. 2023;130:402-413.
    >> Share

  81. CURIEL-AGUILERA FP, Griffiths GR, Rossmann JA, Gonzalez JA, et al
    Titanium versus zirconia complete arch implant-supported fixed prostheses: A comparison of plaque accumulation.
    J Prosthet Dent. 2023;130:369-375.
    >> Share

  82. GUAN X, Zhang J, Chen Y, Han J, et al
    Changes in bone graft height and influencing factors after sinus floor augmentation by using the lateral window approach: A clinical retrospective study of 1 to 2 years.
    J Prosthet Dent. 2023;130:362-368.
    >> Share

  83. HUSSEIN MO
    Photogrammetry technology in implant dentistry: A systematic review.
    J Prosthet Dent. 2023;130:318-326.
    >> Share

  84. CAMPS-FONT O, Rubianes-Porta L, Valmaseda-Castellon E, Jung RE, et al
    Comparison of external, internal flat-to-flat, and conical implant abutment connections for implant-supported prostheses: A systematic review and network meta-analysis of randomized clinical trials.
    J Prosthet Dent. 2023;130:327-340.
    >> Share

  85. AMID R, Kadkhodazadeh M, Moscowchi A
    Immediate implant placement in compromised sockets: A systematic review and meta-analysis.
    J Prosthet Dent. 2023;130:307-317.
    >> Share

    August 2023
  86. AL-SANEA A, Aktas S, Celik T, Kisioglu Y, et al
    Effects of the internal contact surfaces of dental implants on screw loosening: A 3-dimensional finite element analysis.
    J Prosthet Dent. 2023 Aug 27:S0022-3913(23)00464.
    >> Share

  87. ARABBEIKI M, Niroomand MR, Rouhi G
    Improving dental implant stability by optimizing thread design: Simultaneous application of finite element method and data mining approach.
    J Prosthet Dent. 2023 Aug 1:S0022-3913(23)00440.
    >> Share

  88. KONSTANTINOVIC VS, Abd-Ul-Salam H, Jelovac D, Ivanjac F, et al
    Pterygoid and tuberosity implants in the atrophic posterior maxilla: A retrospective cohort study.
    J Prosthet Dent. 2023;130:219.
    >> Share

  89. CHEN J, Guo J, Yang L, Wang L, et al
    Effect of different implant angulations on the biomechanical performance of prosthetic screws in two implant-supported, screw-retained prostheses: A numerical and experimental study.
    J Prosthet Dent. 2023;130:240.
    >> Share

  90. YOSHIDA S, Yamaguchi K, Taniguchi Y, Isshi K, et al
    Design of palatal and lingual augmentation prostheses by using an intraoral scanner for a patient after a glossectomy: A clinical report.
    J Prosthet Dent. 2023;130:267-270.
    >> Share

  91. LI XC, Bidra AS
    A technique for improved gingival esthetics on complete arch implant-supported acrylic resin prototype prosthesis.
    J Prosthet Dent. 2023;130:160-163.
    >> Share

  92. ZHANG YJ, Qian SJ, Lai HC, Shi JY, et al
    Accuracy of photogrammetric imaging versus conventional impressions for complete arch implant-supported fixed dental prostheses: A comparative clinical study.
    J Prosthet Dent. 2023;130:212-218.
    >> Share

  93. SCHUSTER AJ, Possebon APDR, Schinestsck AR, Chagas-Junior OL, et al
    Effect of mandibular bone atrophy on maxillary and mandibular bone remodeling and quality of life with an implant-retained mandibular overdenture after 3 years.
    J Prosthet Dent. 2023;130:220-228.
    >> Share

  94. COSTA AJME, Burgoa S, Pinhata-Baptista OH, Gutierrez V, et al
    Digital workflow for image-guided immediate implant placement by using the socket-shield technique and custom abutment in the esthetic area.
    J Prosthet Dent. 2023;130:155-159.
    >> Share

  95. ESPONA J, Vidal-Ponsoda C, Quintana P, Henarejos-Domingo V, et al
    A fully digital protocol to provide a fixed interim complete denture for immediate loading for a completely edentulous patient: A dental technique.
    J Prosthet Dent. 2023;130:171-178.
    >> Share

    July 2023
  96. POLI PP, Manfredini M, Oliva N, Bettini S, et al
    Detection and sensing of oral xenobiotics in edentulous patients rehabilitated with titanium dental implants: Insights from a scoping review.
    J Prosthet Dent. 2023 Jul 7:S0022-3913(23)00342.
    >> Share

  97. VARGHESE KG, Kurian N, Gandhi N, Mathew JE, et al
    A technique to verify implant abutment position intraorally by using a vacuum thermomolded guide.
    J Prosthet Dent. 2023;130:138-139.
    >> Share

  98. MICHAUD PL, Fokam FY, Kryshtalskyj E, Hamdan N, et al
    Comparison of the torque transferred to the implant-bone interface when tightening abutment screws and when torque testing implants: An in vitro study.
    J Prosthet Dent. 2023;130:96-100.
    >> Share

  99. MARTIN ORTEGA N, Banos MA, Martinez J, Revilla-Leon M, et al
    Techniques for locating the screw access hole in cement-retained implant-supported prostheses: A systematic review.
    J Prosthet Dent. 2023;130:48-58.
    >> Share

  100. LI J, Att W, Chen Z, Lepidi L, et al
    Prosthetic articulator-based implant rehabilitation virtual patient: A technique bridging implant surgery and reconstructive dentistry.
    J Prosthet Dent. 2023;130:8-13.
    >> Share

  101. FARRAG KM, Khamis MM
    Effect of anodized titanium abutment collars on peri-implant soft tissue: A split-mouth clinical study.
    J Prosthet Dent. 2023;130:59-67.
    >> Share

  102. TANAKA Y, Dutra V, Lin WS, Levon J, et al
    Evaluation of the accuracy of buccal bone thickness measurement from cone beam computed tomography compared with histologic analysis.
    J Prosthet Dent. 2023;130:68-73.
    >> Share

  103. SARAFIDOU K, Vasileiadi G, Louvrou MK, Moldovani E, et al
    Screwmentable implant-supported prostheses: A systematic review.
    J Prosthet Dent. 2023;130:35-47.
    >> Share

  104. FERNANDES PF, Grenho L, Fernandes MH, Sampaio-Fernandes JC, et al
    Microgap and bacterial microleakage during the osseointegration period: An in vitro assessment of the cover screw and healing abutment in a platform-switched implant system.
    J Prosthet Dent. 2023;130:87-95.
    >> Share

  105. SINADA N, Wang CI
    Fixed prosthodontic rehabilitation for an adult with ectodermal dysplasia using a completely digital workflow.
    J Prosthet Dent. 2023;130:2-7.
    >> Share

    June 2023
  106. JIA S, Wang G, Zhao Y, Wang X, et al
    Accuracy of an autonomous dental implant robotic system versus static guide-assisted implant surgery: A retrospective clinical study.
    J Prosthet Dent. 2023 Jun 6:S0022-3913(23)00284.
    >> Share

  107. LIN WS
    Complications related to digital technologies in treating edentulous patients with dental implants-Part II. Computer-guided surgery and prosthetic stages.
    J Prosthet Dent. 2023;129:817-818.
    >> Share

  108. PARK S, Chao D, Blackwell KE, Jayanetti J, et al
    Modified vestibuloplasty of the zygomaticoalveolar crest to gain intradefect support for an obturator prosthesis.
    J Prosthet Dent. 2023;129:946-950.
    >> Share

  109. PARATELLI A, Vania S, Gomez-Polo C, Ortega R, et al
    Techniques to improve the accuracy of complete arch implant intraoral digital scans: A systematic review.
    J Prosthet Dent. 2023;129:844-854.
    >> Share

  110. ODA Y, Mori G, Sasaki H, Furuya Y, et al
    Dimensional changes of buccal bone in the edentulous maxilla with telescopic-retained implant-supported fixed dental prostheses.
    J Prosthet Dent. 2023;129:878-886.
    >> Share

  111. CARNEIRO PEREIRA AL, Souza Curinga MR, Melo Segundo HV, da Fonte Porto Carreiro A, et al
    Factors that influence the accuracy of intraoral scanning of total edentulous arches rehabilitated with multiple implants: A systematic review.
    J Prosthet Dent. 2023;129:855-862.
    >> Share

  112. JAYANETTI J, Shah K, Chao D, Drago C, et al
    Double sleeve guided placement of quadruple zygomatic implants for rehabilitation of a patient with ectodermal dysplasia: A clinical report.
    J Prosthet Dent. 2023;129:824-830.
    >> Share

  113. HOMSI G, Kumar A, Almotairy N, Wester E, et al
    Assessment of masticatory function in older individuals with bimaxillary implant-supported fixed prostheses or with a natural dentition: A case-control study.
    J Prosthet Dent. 2023;129:871-877.
    >> Share

  114. SCHUBERT O, Edelhoff D, Schweiger J, Guth JF, et al
    Atraumatic intraoral scans and virtual hybrid casts for custom implant abutments and zirconia implants: Accuracy of the workflow.
    J Prosthet Dent. 2023;129:920-929.
    >> Share

  115. LV HX, Rong R, Sa Y
    Radiopaque fiducial markers as an aid to fabrication of an implant surgical guide for a patient with orthodontic brackets: A dental technique.
    J Prosthet Dent. 2023;129:835-839.
    >> Share

  116. ROCHA COM, Longhini D, Pereira RP, Lima ALO, et al
    Masticatory efficiency in complete denture and single implant-retained mandibular overdenture wearers with different occlusion schemes: A randomized clinical trial.
    J Prosthet Dent. 2023;129:888-894.
    >> Share

  117. WANG T, Ye L, Sun Y, Wu Y, et al
    Fabricating a surgical template for guiding sinus floor elevation in the maxillary sinus septa with simultaneous implant placement: A dental technique.
    J Prosthet Dent. 2023;129:840-843.
    >> Share

  118. WEBER KR, Meneghetti DE, Benetti P, Della Bona A, et al
    Influence of piston material on the fatigue behavior of a glass-ceramic.
    J Prosthet Dent. 2023;129:931-937.
    >> Share

    May 2023
  119. ELNASHOUKATY HM, ElDakkak S, Abdelhakim A
    Accuracy of a custom two-piece surgical guide for all-on-four dental implant placement: An in vitro study.
    J Prosthet Dent. 2023 May 23:S0022-3913(23)00279.
    >> Share

  120. LIN WS
    Complications related to digital technologies in treating edentulous patients with implant-supported prostheses. Part 1: Digital data collection and surgical planning stages.
    J Prosthet Dent. 2023;129:674-675.
    >> Share

  121. ARTOPOULOU II, Zinelis S, Lemon JC, Polyzois G, et al
    Effect of spatial arrangement and clinical service lifetime simulation on the retention of magnetic units used in implant-anchored orbital prostheses.
    J Prosthet Dent. 2023;129:811.
    >> Share

  122. WANG SC, Wang JC, Chang CJ, Yuan K, et al
    Interdisciplinary treatment with implant-supported two-unit cantilever prosthesis for a patient with hypodontia: A clinical report.
    J Prosthet Dent. 2023;129:676-680.
    >> Share

  123. YI Y, Heo SJ, Koak JY, Kim SK, et al
    Mechanical complications of implant-supported restorations with internal conical connection implants: A 14-year retrospective study.
    J Prosthet Dent. 2023;129:732-740.
    >> Share

  124. YANG S, Liu Y, Zhang S, Yue L, et al
    A cast-free approach to fabricating an implant-supported interim restoration: A dental technique.
    J Prosthet Dent. 2023;129:690-695.
    >> Share

    April 2023
  125. LAMPKIN A, Bensoussan J, Curtis D, Koka S, et al
    Effect of self-reported clinician experience level on perceptions of the relative rankings of risk factors for biological complications with dental implant therapy.
    J Prosthet Dent. 2023 Apr 21:S0022-3913(23)00185.
    >> Share

  126. SIGILIAO CELLES CA, Ferreira I, Valente MDLDC, Dos Reis AC, et al
    Osseointegration in relation to drilling speed in the preparation of dental implants sites: A systematic review.
    J Prosthet Dent. 2023 Apr 3:S0022-3913(23)00138.
    >> Share

  127. VARGHESE KG, Kurian N, Gandhi N, Gandhi S, et al
    Three-dimensional finite element analysis of zygomatic implants for rehabilitation of patients with a severely atrophic maxilla.
    J Prosthet Dent. 2023;129:597.
    >> Share

  128. RUTKUNAS V, Dirse J, Kules D, Simonaitis T, et al
    Misfit simulation on implant prostheses with different combinations of engaging and nonengaging titanium bases. Part 1: Stereomicroscopic assessment of the active and passive fit.
    J Prosthet Dent. 2023;129:589-596.
    >> Share

  129. KURIAN N, Gandhi N, Daniel AY, Varghese KG, et al
    A technique for splinting implant impression posts by using nylon sutures.
    J Prosthet Dent. 2023;129:669-670.
    >> Share

  130. MCLAUGHLIN SD, Miller NR, Sabol JV
    Restoration of a nonideally placed anterior implant: A clinical report.
    J Prosthet Dent. 2023;129:523-526.
    >> Share

  131. BITTENCOURT TC, Souza Picorelli Assis NM, Ribeiro CG, Ferreira CF, et al
    Evaluation of the peri-implant tissues in the esthetic zone with prefabricated titanium or zirconia abutments: A randomized controlled clinical trial with a minimum follow-up of 7 years.
    J Prosthet Dent. 2023;129:573-581.
    >> Share

  132. LEMOS CAA, Nunes RG, Santiago-Junior JF, Marcela de Luna Gomes J, et al
    Are implant-supported removable partial dentures a suitable treatment for partially edentulous patients? A systematic review and meta-analysis.
    J Prosthet Dent. 2023;129:538-546.
    >> Share

    March 2023
  133. LI Z, Xie R, Bai S, Zhao Y, et al
    Implant placement with an autonomous dental implant robot: A clinical report.
    J Prosthet Dent. 2023 Mar 22:S0022-3913(23)00124.
    >> Share

  134. TAYLOR TD
    Oscar E. Beder: Pioneer in dental implant research and prosthodontist.
    J Prosthet Dent. 2023 Mar 3:S0022-3913(23)00102.
    >> Share

  135. MUHETAER A, Yang H, Liu Y, Huang C, et al
    Three-dimensionally printed implant surgical guide-related experience, knowledge, attitude, and professional behaviors among 2028 dentists in China: A cross-sectional study.
    J Prosthet Dent. 2023;129:448.
    >> Share

  136. LI R, Wu Z, Chen S, Li X, et al
    Biomechanical behavior analysis of four types of short implants with different placement depths using the finite element method.
    J Prosthet Dent. 2023;129:447.
    >> Share

  137. CAKMAK G, Herren KV, Donmez MB, Kahveci C, et al
    Effect of coffee thermocycling on the surface roughness and stainability of nanographene-reinforced polymethyl methacrylate used for fixed definitive prostheses.
    J Prosthet Dent. 2023;129:507.
    >> Share

  138. CHO JH, Yoon HI, Oh JH, Kim DH, et al
    Effect of maximum support attachment angle on intaglio surface trueness of anatomic contour monolithic prostheses manufactured by digital light processing and zirconia suspension.
    J Prosthet Dent. 2023;129:478-485.
    >> Share

  139. PEREZ-GIUGOVAZ MG, Sadeghpour M, Revilla-Leon M
    Virtual 3-dimensional representation of a completely edentulous patient for computer-aided static implant planning.
    J Prosthet Dent. 2023;129:384-390.
    >> Share

  140. BENTO VAA, Gomes JML, Lemos CAA, Limirio JPJO, et al
    Prevalence of proximal contact loss between implant-supported prostheses and adjacent natural teeth: A systematic review and meta-analysis.
    J Prosthet Dent. 2023;129:404-412.
    >> Share

  141. ABDEL RAHEEM IM, Yehia SA, Hammad IA
    A device to facilitate separation of components of combined screw- and cement-retained implant-supported crowns.
    J Prosthet Dent. 2023;129:391-394.
    >> Share

  142. LIU M, Wang S, Chen H, Liu Y, et al
    A technique to fabricate a custom CAD-CAM periapical radiographic film holder for implant assessment.
    J Prosthet Dent. 2023;129:400-403.
    >> Share

  143. BEDOUIN Y, Lefrancois E, Salomon JP, Auroy P, et al
    Abutment rotational freedom on five implant systems with different internal connections.
    J Prosthet Dent. 2023;129:433-439.
    >> Share

  144. NEGREIROS WM, Chanting Sun T, Gallucci GO, Hamilton A, et al
    Digital verification and correction of digital intraoral scans for fixed implant rehabilitation of edentulous arches: A dental technique.
    J Prosthet Dent. 2023;129:395-399.
    >> Share

    February 2023
  145. VARGAS-MORENO VF, Ribeiro MCO, Gomes RS, Faot F, et al
    Clinical performance of short and extrashort dental implants with wide diameter: A systematic review with meta-analysis.
    J Prosthet Dent. 2023 Feb 23:S0022-3913(23)00010.
    >> Share

  146. LEONARD JF, Taxel P, Kuo CL, Da Cunha Godoy L, et al
    Dental implant and bone augmentation treatment in bone-compromised patients: Oral health-related quality of life outcomes.
    J Prosthet Dent. 2023 Feb 18:S0022-3913(23)00049.
    >> Share

  147. BORNES RS, Montero J, Correia ARM, Rosa NRDN, et al
    Use of bioinformatic strategies as a predictive tool in implant-supported oral rehabilitation: A scoping review.
    J Prosthet Dent. 2023;129:322.
    >> Share

  148. NICCHIO N, Goncalves V, Mendonca G, Sales E Pessoa R, et al
    Accuracy of partially and fully guided surgical techniques for immediate implant placement: An in vitro assessment.
    J Prosthet Dent. 2023;129:363.
    >> Share

  149. LAVERTY DP, Addison O, Newsum D, Bateman G, et al
    Prosthodontic complications during implant-based oral rehabilitation of patients with head and neck cancer.
    J Prosthet Dent. 2023;129:366-372.
    >> Share

  150. MILLS CB, Steinberg J, Rubenstein JE, Lee PP, et al
    A successful implant-supported fixed prosthesis in a patient with osteopetrosis: A clinical report.
    J Prosthet Dent. 2023;129:247-250.
    >> Share

  151. REVILLA-LEON M, Gomez-Polo M, Vyas S, Barmak AB, et al
    Artificial intelligence models for tooth-supported fixed and removable prosthodontics: A systematic review.
    J Prosthet Dent. 2023;129:276-292.
    >> Share

  152. CHAO D, Chang TL
    Use of zirconia onlays in a maxillary removable implant-supported denture: A clinical report.
    J Prosthet Dent. 2023;129:251-256.
    >> Share

  153. TAK S, Noh G, Jeong Y, Lee H, et al
    Automated vector analysis to design implant-supported prostheses: A dental technique.
    J Prosthet Dent. 2023;129:257-261.
    >> Share

  154. PARK J, Yoo JJ, Yoon JH
    Retrofitting of an implant-supported surveyed crown under an existing removable partial denture by using an acrylic resin template.
    J Prosthet Dent. 2023;129:271-275.
    >> Share

  155. REVILLA-LEON M, Gomez-Polo M, Vyas S, Barmak BA, et al
    Artificial intelligence applications in implant dentistry: A systematic review.
    J Prosthet Dent. 2023;129:293-300.
    >> Share

  156. ZHANG R, Li S, Liu Y
    Assessing the accuracy of fabricated implant surgical guides by reconstructing the implant position based on cone beam computed tomography images: A dental technique.
    J Prosthet Dent. 2023;129:267-270.
    >> Share

  157. TOHME H, Lawand G, Chmielewska M, Makhzoume J, et al
    Comparison between stereophotogrammetric, digital, and conventional impression techniques in implant-supported fixed complete arch prostheses: An in vitro study.
    J Prosthet Dent. 2023;129:354-362.
    >> Share

    January 2023
  158. YAN Y, Yue X, Lin X, Geng W, et al
    A completely digital workflow aided by cone beam computed tomography scanning to maintain jaw relationships for implant-supported fixed complete dentures: A clinical study.
    J Prosthet Dent. 2023;129:116-124.
    >> Share

  159. MENDES FSF, Moura Dos Santos AC, Oliveira VC, Macedo AP, et al
    Comparative analysis of Candida spp. isolated from complete denture wearers with and without an HIV diagnosis.
    J Prosthet Dent. 2023;129:140-146.
    >> Share

  160. CAI B, Tong Z, Qian Y, Zhu W, et al
    Immediate loaded fixed complete dentures supported by implants in patients with a history of periodontitis: A retrospective cohort study of 2 to 7 years.
    J Prosthet Dent. 2023;129:125-130.
    >> Share

  161. SU FY, Segal A
    Use of aluminum foil to facilitate open-tray implant impressions.
    J Prosthet Dent. 2023;129:239-240.
    >> Share

  162. POZZI A, Arcuri L, Fabbri G, Singer G, et al
    Long-term survival and success of zirconia screw-retained implant-supported prostheses for up to 12 years: A retrospective multicenter study.
    J Prosthet Dent. 2023;129:96-108.
    >> Share

  163. REVILLA-LEON M, Rubenstein J, Methani MM, Piedra-Cascon W, et al
    Trueness and precision of complete-arch photogrammetry implant scanning assessed with a coordinate-measuring machine.
    J Prosthet Dent. 2023;129:160-165.
    >> Share

  164. AYYADANVEETTIL P, Thavakkara V, Koodakkadavath S, Thavakkal A, et al
    Influence of collar height of definitive restoration and type of luting cement on the amount of residual cement in implant restorations: A clinical study.
    J Prosthet Dent. 2023;129:109-115.
    >> Share

  165. CARNEIRO PEREIRA AL, Pinto Campos MFT, Porto de Freitas RFC, Paiva Torres ACS, et al
    Partially digital workflow for making complete-arch implant-supported fixed prostheses: A dental technique.
    J Prosthet Dent. 2023;129:18-23.
    >> Share

    December 2022
  166. LUFT RL, da Rosa LS, Machado PS, Valandro LF, et al
    Influence of connector cross-sectional geometry on the load-bearing capacity under fatigue of implant-supported zirconia fixed partial prosthesis.
    J Prosthet Dent. 2022;128:1335.
    >> Share

  167. KIM YJ, Ko KH, Park CJ, Cho LR, et al
    Connector design effects on the in vitro fracture resistance of 3-unit monolithic prostheses produced from 4 CAD-CAM materials.
    J Prosthet Dent. 2022;128:1319.
    >> Share

  168. BAE S, Mai HN, Lee DH
    Accuracy of digitally fabricated drilling guide to form screw-access channels in cement-retained implant prostheses: A randomized clinical trial.
    J Prosthet Dent. 2022;128:1282.
    >> Share

  169. ZHANG H, Ramos V Jr, Bratos M, Liu PP, et al
    Effect of the attachments on clinical outcomes of mandibular distal extension implant-supported removable partial dentures: A systematic review.
    J Prosthet Dent. 2022;128:1211-1220.
    >> Share

  170. DHOLAM KP, Singh GP, Sathaye N, Gurav SV, et al
    Two-piece oral facial prothesis retained with magnets for a complex maxillary facial defect: A clinical report.
    J Prosthet Dent. 2022;128:1365-1368.
    >> Share

  171. KNOBLOCH LA, Larsen P, McGlumphy E, Kim DG, et al
    Prospective cohort study to evaluate narrow diameter implants for restoration of a missing lateral incisor in patients with a cleft palate: One-year results.
    J Prosthet Dent. 2022;128:1265-1274.
    >> Share

  172. YANG J, Liu Q, Shiba T, Ji C, et al
    Application of digital prosthodontics and connective tissue grafting in the management of peri-implant mucosal recession around a malpositioned 1-piece implant: A clinical report.
    J Prosthet Dent. 2022;128:1145-1151.
    >> Share

  173. FONSECA M, Molinero-Mourelle P, Buser R, Yilmaz B, et al
    Fabrication of an implant-retained overdenture with ceramic crowns cemented on a polyetherketoneketone framework: A clinical report.
    J Prosthet Dent. 2022;128:1152-1157.
    >> Share

  174. DHOLAM KP, Parkar SP, Dugad JA, Kharade PP, et al
    Development of a psychosocial perception scale and comparison of psychosocial perception of patients with extra oral defects before and after facial prosthesis.
    J Prosthet Dent. 2022;128:1398-1404.
    >> Share

  175. ZANDINEJAD A, Liang H, Fisher Cosio NA, Revilla-Leon M, et al
    Fabrication of a complete-arch implant-supported fixed interim prosthesis by using a cone beam computed tomography digital scan for a patient with primordial dwarfism: A dental technique.
    J Prosthet Dent. 2022;128:1179-1183.
    >> Share

  176. AYYADANVEETTIL P, Thavakkara V, Latha N, Pavanan M, et al
    Randomized clinical trial of zirconia and polyetheretherketone implant abutments for single-tooth implant restorations: A 5-year evaluation.
    J Prosthet Dent. 2022;128:1275-1281.
    >> Share

  177. CANALLATOS P, Jayanetti J, Beumer J
    An implant-retained auricular prosthesis complicated by a modified temporal bone resection.
    J Prosthet Dent. 2022;128:1375-1379.
    >> Share

  178. HONG HH, Hong A, Chang CC, Liu HL, et al
    Characteristics of the convergent angles of tapered implants based on a premolar root model.
    J Prosthet Dent. 2022;128:1320-1327.
    >> Share

  179. ALQARNI H, Montgomery P, Aponte-Wesson R, Won AM, et al
    Combined rehabilitation of a lower lip defect after resection of floor of mouth cancer: A clinical report.
    J Prosthet Dent. 2022;128:1369-1374.
    >> Share

  180. CARNEIRO PEREIRA AL, Carvalho Porto de Freitas RF, de Fatima Trindade Pinto Campos M, Soares Paiva Torres AC, et al
    Trueness of a device for intraoral scanning to capture the angle and distance between implants in edentulous mandibular arches.
    J Prosthet Dent. 2022;128:1310-1317.
    >> Share

  181. MEIRA IA, Gama LT, Prado-Tozzi DA, Pinheiro MA, et al
    Speech in implant-supported and removable complete denture wearers: A systematic review.
    J Prosthet Dent. 2022;128:1230-1238.
    >> Share

  182. ALQARNI H, Alsaloum M, Alzaid A
    Prosthetic rehabilitation of meth mouth with implant-supported fixed dental prostheses: A clinical report.
    J Prosthet Dent. 2022;128:1140-1144.
    >> Share

  183. XIAO T, Peng M, Huang C, Liang S, et al
    Use of ceramic veneers for improving esthetics and extending the service life of an existing cement-retained implant-supported ceramic restoration: A clinical report with a 3-year follow-up.
    J Prosthet Dent. 2022;128:1135-1139.
    >> Share

  184. YILMAZ B, Gouveia D, Seghi RR, Johnston WM, et al
    Effect of crown height on the screw joint stability of zirconia screw-retained crowns.
    J Prosthet Dent. 2022;128:1328-1334.
    >> Share

  185. WANG CI, Cho SH, Ivey A, Reddy LV, et al
    Combined bone- and mucosa-supported 3D-printed guide for sinus slot preparation and prosthetically driven zygomatic implant placement.
    J Prosthet Dent. 2022;128:1165-1170.
    >> Share

    November 2022
  186. MASSUDA CKM, de Carvalho MR, de Moraes JB, Pallos D, et al
    Accuracy of guided dental implant surgery using a fully digital workflow: A case series.
    J Prosthet Dent. 2022 Nov 10. pii: S0022-3913(22)00635.
    >> Share

  187. ALZOUBI FM, Sabti M, Alsarraf E, Alshahrani FA, et al
    Preload evaluation of 2 implant-supported fixed partial denture abutment designs.
    J Prosthet Dent. 2022;128:1067.
    >> Share

  188. KURIAN N, Varghese KG, Dhawan K
    Visual inspection of implant screw access hole with an endoscope camera.
    J Prosthet Dent. 2022;128:1128-1129.
    >> Share

  189. SALLORENZO A, Gomez-Polo M
    Comparative study of the accuracy of an implant intraoral scanner and that of a conventional intraoral scanner for complete-arch fixed dental prostheses.
    J Prosthet Dent. 2022;128:1009-1016.
    >> Share

  190. ARROYO-CRUZ G, Orozco-Varo A, Dominguez-Cardoso P, Jimenez-Castellanos E, et al
    A comparison of the passive fit of a 3-unit implant-supported fixed partial denture fabricated by lost-wax casting, milling soft metal blocks, or direct metal laser sintering: An in vitro study.
    J Prosthet Dent. 2022;128:1055-1060.
    >> Share

  191. POMARES-PUIG C, Sanchez-Garces MA, Jorba-Garcia A
    Dynamic and static computer-guided surgery using the double-factor technique for completely edentulous patients: A dental technique.
    J Prosthet Dent. 2022;128:852-857.
    >> Share

  192. CHEN H, Gu T, Lai H, Gu X, et al
    Evaluation of hard tissue 3-dimensional stability around single implants placed with guided bone regeneration in the anterior maxilla: A 3-year retrospective study.
    J Prosthet Dent. 2022;128:919-927.
    >> Share

  193. HATAMLEH MM, Watson J, Nuseir A
    Successful prosthetic salvage of a suboptimal autogenous auricular reconstruction with digital technologies: A report of 3 challenging treatments.
    J Prosthet Dent. 2022;128:1103-1108.
    >> Share

  194. CANULLO L, Menini M, Bagnasco F, Di Tullio N, et al
    Tissue-level versus bone-level single implants in the anterior area rehabilitated with feather-edge crowns on conical implant abutments: An up to 5-year retrospective study.
    J Prosthet Dent. 2022;128:936-941.
    >> Share

  195. AGUSTIN-PANADERO R, Manes-Ferrer JF, Bustamante-Hernandez N, Sola-Ruiz MF, et al
    Implant-supported overdenture with horizontal insertion for treating the edentulous atrophic maxilla: A case series.
    J Prosthet Dent. 2022;128:942-948.
    >> Share

  196. LYU M, Di P, Lin Y, Jiang X, et al
    Accuracy of impressions for multiple implants: A comparative study of digital and conventional techniques.
    J Prosthet Dent. 2022;128:1017-1023.
    >> Share

  197. COUTINHO PC, Nogueira TE, Leles CR
    Single-implant mandibular overdentures: Clinical, radiographic, and patient-reported outcomes after a 5-year follow-up.
    J Prosthet Dent. 2022;128:949-955.
    >> Share

  198. BLASI A, Henarejos-Domingo V, Madeira S, Blasi G, et al
    Stone verification device for verifying the definitive cast of an implant-supported restoration: A dental technique.
    J Prosthet Dent. 2022;128:858-863.
    >> Share

    October 2022
  199. SHIM JS, Li CY, Won JE, Ryu JJ, et al
    Evaluation of microleakage and push-out bond strength of various composite resins for sealing the screw-access channel in implant-supported restorations.
    J Prosthet Dent. 2022;128:764.
    >> Share

  200. SADEGHOLVAD M, Ansarifard E, Derafshi R, Dehno SMS, et al
    Comparison of the accuracy of impressions made of 2 implants with interfering axial convergence with CAD-CAM impression copings and the altered cast technique: An in vitro study.
    J Prosthet Dent. 2022;128:745.
    >> Share

  201. SILVA GC
    A straightforward technique for removing titanium bases from screw-retained monolithic implant-supported prostheses.
    J Prosthet Dent. 2022;128:837-838.
    >> Share

  202. TAN JZH, Tan MY, See Toh YL, Wong KY, et al
    Three-dimensional positional accuracy of intraoral and laboratory implant scan bodies.
    J Prosthet Dent. 2022;128:735-744.
    >> Share

  203. OZAN O, Seker E, Cakmak G, Guo X, et al
    Effect of guide sleeve material, region, diameter, and number of times drills were used on the material loss from sleeves and drills used for surgical guides: An in vitro study.
    J Prosthet Dent. 2022;128:746-753.
    >> Share

  204. JUNG HT, Kim HY, Song SY, Park JH, et al
    Accuracy of implant impression techniques with a scannable healing abutment.
    J Prosthet Dent. 2022;128:729-734.
    >> Share

  205. REVELL G, Simon B, Mennito A, Evans ZP, et al
    Evaluation of complete-arch implant scanning with 5 different intraoral scanners in terms of trueness and operator experience.
    J Prosthet Dent. 2022;128:632-638.
    >> Share

  206. BHATT R, Jurel SK, Chand P, Solanki N, et al
    Functional and psychological evaluation of premenopausal and postmenopausal women after provision of a complete denture prosthesis.
    J Prosthet Dent. 2022;128:674-679.
    >> Share

  207. ABDELREHIM A, Abdelhakim A, ElDakkak S
    Influence of different materials on retention behavior of CAD-CAM fabricated bar attachments.
    J Prosthet Dent. 2022;128:765-775.
    >> Share

  208. SCHUSTER AJ, Possebon APDR, Bielemann AM, Chagas-Junior OL, et al
    Effect of mandibular residual ridge regularization on peri-implant wound healing when narrow diameter implants are used as overdenture retainers.
    J Prosthet Dent. 2022;128:648-655.
    >> Share

  209. ZHANG X, Shao J, Wan Q, Li L, et al
    Interimplant papilla reconstruction at second-stage surgery: A technique.
    J Prosthet Dent. 2022;128:554-559.
    >> Share

  210. ZARRATI S, Fathesami S, Manafi A
    Custom nasal stent and columellar reconstruction after a rhinoplasty complication: A clinical report.
    J Prosthet Dent. 2022;128:823-826.
    >> Share

  211. LEE H, Jo M, Sailer I, Noh G, et al
    Effects of implant diameter, implant-abutment connection type, and bone density on the biomechanical stability of implant components and bone: A finite element analysis study.
    J Prosthet Dent. 2022;128:716-728.
    >> Share

  212. WITTNEBEN JG, Igarashi K, Bragger U, Daniel B, et al
    Vertical eruption of anterior maxillary teeth adjacent to single-implant-supported crowns: An assessment after a 3-year follow-up period.
    J Prosthet Dent. 2022;128:605-610.
    >> Share

  213. MANICONE PF, De Angelis P, Rella E, Damis G, et al
    Patient preference and clinical working time between digital scanning and conventional impression making for implant-supported prostheses: A systematic review and meta-analysis.
    J Prosthet Dent. 2022;128:589-596.
    >> Share

  214. MOHSEN YH, Kader MA, Abdel Nabi N, Radi IAW, et al
    Satisfaction with resilient denture liner versus acrylic resin telescopic prostheses for patients with ectodermal dysplasia: A nonrandomized crossover clinical trial.
    J Prosthet Dent. 2022;128:656-663.
    >> Share

  215. VALENTE MLC, Bolfarini C, de Oliveira DP, Dos Reis AC, et al
    Dental mini-implant designs to support overdentures: Development, biomechanical evaluation, and 3D digital image correlation.
    J Prosthet Dent. 2022;128:754-763.
    >> Share

    September 2022
  216. CONEJO J, Han S, Atria PJ, Stone-Hirsh L, et al
    Full digital workflow to resolve angled adjacent dental implants: A dental technique.
    J Prosthet Dent. 2022 Sep 13. pii: S0022-3913(22)00496.
    >> Share

  217. XU X, Ding H, Xu L
    Response to comments on: Short versus standard implants for single-crown restorations in the posterior region: A systematic review and meta-analysis.
    J Prosthet Dent. 2022;128:541-544.
    >> Share

  218. SOARES PM, Cadore-Rodrigues AC, Packaeser MG, Bacchi A, et al
    Masking ability of implant abutment substrates by using different ceramic restorative systems.
    J Prosthet Dent. 2022;128:496.
    >> Share

  219. JIA PY, Liu Q, Yang JW, Jiang XT, et al
    Three-dimensional macroscopical quantification of plaque accumulation on implant-supported fixed complete dental prostheses surfaces: A methodological pilot study.
    J Prosthet Dent. 2022;128:467.
    >> Share

  220. SADOWSKY SJ
    Comments regarding: Xu X, Hu B, Xu Y, Liu Q, Ding H, Xu L. Short versus standard implants for single-crown restorations in the posterior region: A systematic review and meta-analysis. J Prosthet Dent 2020;124:530-8.
    J Prosthet Dent. 2022;128:541.
    >> Share

  221. REAL-VOLTAS F, Figueras-Alvarez O, Barrocal-Rodriguez S
    Straightforward tip for identifying the type of screwdriver needed for screw-retained implant-supported prostheses.
    J Prosthet Dent. 2022;128:539-540.
    >> Share

  222. PIEDRA-CASCON W, Mostafavi D, Ruiz-de-Gopegui J, Perez-Pevida E, et al
    Fabricating a dual-material, vat-polymerized, additively manufactured static implant surgical guide: A dental technique.
    J Prosthet Dent. 2022;128:233-238.
    >> Share

  223. NORONHA OLIVEIRA M, Rega Aguilera V, Suarez Rodriguez JD, Benfatti CAM, et al
    Challenging replacement of a maxillary canine with an implant-supported restoration: A surgical and prosthetic approach.
    J Prosthet Dent. 2022;128:228-232.
    >> Share

  224. CAMARGOS GV, Rangel EF, Rangel KF, Machado AR, et al
    Guided implant surgery workflow in edentulous patients: A precise and rapid technique.
    J Prosthet Dent. 2022;128:239-244.
    >> Share

  225. SHEN XT, Li JY, Luo X, Feng Y, et al
    Peri-implant marginal bone changes with implant-supported metal-ceramic or monolithic zirconia single crowns: A retrospective clinical study of 1 to 5 years.
    J Prosthet Dent. 2022;128:368-374.
    >> Share

  226. CHOCHLIDAKIS K, Ercoli C, Einarsdottir E, Romeo D, et al
    Implant survival and biologic complications of implant fixed complete dental prostheses: An up to 5-year retrospective study.
    J Prosthet Dent. 2022;128:375-381.
    >> Share

  227. KNECHTLE N, Wiedemeier D, Mehl A, Ender A, et al
    Accuracy of digital complete-arch, multi-implant scans made in the edentulous jaw with gingival movement simulation: An in vitro study.
    J Prosthet Dent. 2022;128:468-478.
    >> Share

  228. MULLA SH, Seghi RR, Johnston WM, Yilmaz B, et al
    Effect of cyclic loading on reverse torque values of angled screw channel systems.
    J Prosthet Dent. 2022;128:458-466.
    >> Share

  229. ROIG E, Roig M, Garza LC, Costa S, et al
    Fit of complete-arch implant-supported prostheses produced from an intraoral scan by using an auxiliary device and from an elastomeric impression: A pilot clinical trial.
    J Prosthet Dent. 2022;128:404-414.
    >> Share

  230. EDMONDSON EK, Trejo PM, Soldatos N, Weltman RL, et al
    The ability to screw-retain single implant-supported restorations in the anterior maxilla: A CBCT analysis.
    J Prosthet Dent. 2022;128:443-449.
    >> Share

  231. TOZUM MD, Ataman-Duruel ET, Duruel O, Nares S, et al
    Association between ridge morphology and complexity of implant placement planning in the posterior mandible.
    J Prosthet Dent. 2022;128:361-367.
    >> Share

  232. YANG X, Liu Y, Li Y, Zhao Y, et al
    Accuracy and feasibility of 3D-printed custom open trays for impressions of multiple implants: A self-controlled clinical trial.
    J Prosthet Dent. 2022;128:396-403.
    >> Share

  233. LU W, Zhou Y, Yang H, Cheng Z, et al
    Efficacy of strontium supplementation on implant osseointegration under osteoporotic conditions: A systematic review.
    J Prosthet Dent. 2022;128:341-349.
    >> Share

  234. SHAH NP, Khanna A, Pai AR, Sheth VH, et al
    An evaluation of virtually planned and 3D-printed stereolithographic surgical guides from CBCT and digital scans: An in vitro study.
    J Prosthet Dent. 2022;128:436-442.
    >> Share

    August 2022
  235. DI GIACOMO GAP, Cury PR, da Silva AM, da Silva JVL, et al
    Surgical guides for flapless dental implant placement and immediate definitive prosthesis installation by using selective laser melting and sintering for 3D metal and polymer printing: A clinical report.
    J Prosthet Dent. 2022 Aug 11. pii: S0022-3913(22)00426.
    >> Share

  236. ELSONBATY MA, Alshimy AM, Abdul-Monem MM, Neena AF, et al
    Evaluation of retention and wear of a titanium-formed stud overdenture attachment with different interimplant angulations after simulated clinical use: An in vitro study.
    J Prosthet Dent. 2022;128:205.
    >> Share

  237. YAO Y, Lin Z, Yang X
    Implant placement in the pterygoid region with dynamically navigated surgery: A clinical report.
    J Prosthet Dent. 2022;128:125-129.
    >> Share

  238. KESSLER A, Dosch M, Reymus M, Folwaczny M, et al
    Influence of 3D-printing method, resin material, and sterilization on the accuracy of virtually designed surgical implant guides.
    J Prosthet Dent. 2022;128:196-204.
    >> Share

  239. PATODIA C, Sutton A, Gozalo D, Font K, et al
    Cost and complications associated with implant-supported overdentures with a resilient-attachment system: A retrospective study.
    J Prosthet Dent. 2022;128:181-186.
    >> Share

  240. ABLE FB, Campanha NH, Younes IA, Sartori IAM, et al
    Evaluation of the intaglio surface shape of implant-supported complete-arch maxillary prostheses and its association with biological complications: An analytical cross-sectional study.
    J Prosthet Dent. 2022;128:174-180.
    >> Share

  241. XIAO W, Chen Y, Chu C, Dard MM, et al
    Influence of implant location on titanium-zirconium alloy narrow-diameter implants: A 1-year prospective study in smoking and nonsmoking populations.
    J Prosthet Dent. 2022;128:159-166.
    >> Share

    July 2022
  242. PEREIRA MMA, Dini C, Souza JGS, Barao VAR, et al
    Industry support for dental implant research: A metatrend study of industry partnership in the development of new technologies.
    J Prosthet Dent. 2022 Jul 7. pii: S0022-3913(22)00355.
    >> Share

  243. PACINELLI A
    Response to the letter to the Editor regarding "A technique for identifying implant abutment screw heads and corresponding implant drivers by using colored polytetrafluorethylene tape".
    J Prosthet Dent. 2022;128:116-117.
    >> Share

  244. SHOR A, Janakievski J
    Comments regarding: Pacinelli A, Bekov G, Nat N, Guerrero D. A technique for identifying implant abutment screw heads and corresponding implant drivers by using colored polytetrafluorethylene tape. J Prosthet Dent 2022;127:59-60.
    J Prosthet Dent. 2022;128:115-116.
    >> Share

  245. APONTE-WESSON R, Knott J, Montgomery P, Chambers MS, et al
    Floor of mouth prosthesis with removable depressible tongue: A clinical report.
    J Prosthet Dent. 2022;128:107-111.
    >> Share

  246. LEE SJ, Jamjoom FZ, Le T, Radics A, et al
    A clinical study comparing digital scanning and conventional impression making for implant-supported prostheses: A crossover clinical trial.
    J Prosthet Dent. 2022;128:42-48.
    >> Share

  247. ZIMMERMANN D, Ferreira de Almeida DC, Velloso G, Moraschini V, et al
    Digital replication of the peri-implant soft tissue contour of implant-supported crowns: A dental technique.
    J Prosthet Dent. 2022;128:8-12.
    >> Share

  248. GAUR V, Patel K, Palka L
    An implant-supported prosthetic rehabilitation of a patient with a bilateral subtotal maxillectomy defect secondary to rhino-orbital-cerebral mucormycosis: A clinical report of a graftless approach.
    J Prosthet Dent. 2022;128:101-106.
    >> Share

  249. GEHRKE SA, Dedavid BA, Prados-Frutos JC
    Effects of different switched or not-switched implant and abutment platform designs and marginal bone loss on fracture strength: An in vitro study.
    J Prosthet Dent. 2022;128:55-62.
    >> Share

  250. PIMENTA J, Szmukler-Moncler S, Raigrodski AJ
    Physical characterization of 3 implant systems made of distinct materials with distinct surfaces.
    J Prosthet Dent. 2022;128:63-72.
    >> Share

    June 2022
  251. BEDROSSIAN EA
    Complete digital workflow for complete arch implant therapy: Fact or fiction?
    J Prosthet Dent. 2022;127:821-822.
    >> Share

  252. ARIAS SR, Londono J, Hemati A
    A method for fabrication of extraoral verification template for implant master cast.
    J Prosthet Dent. 2022;127:943-944.
    >> Share

  253. ALDHOHRAH T, Mashrah MA, Wang Y
    Effect of 2-implant mandibular overdenture with different attachments and loading protocols on peri-implant health and prosthetic complications: A systematic review and network meta-analysis.
    J Prosthet Dent. 2022;127:832-844.
    >> Share

  254. LIM JH, Shin SH, Nam NE, Bayarsaikhan E, et al
    Sleeve insert scan body to predict implant placement position by using implant surgical guides: A dental technique.
    J Prosthet Dent. 2022;127:827-831.
    >> Share

  255. RAHMAN AM, Jamayet NB, Nizami MMUI, Johari Y, et al
    Effect of tropical outdoor weathering on the surface roughness and mechanical properties of maxillofacial silicones.
    J Prosthet Dent. 2022;127:937-942.
    >> Share

  256. HONORIO TONIN BS, He Y, Ye N, Chew HP, et al
    Effects of tightening torque on screw stress and formation of implant-abutment microgaps: A finite element analysis.
    J Prosthet Dent. 2022;127:882-889.
    >> Share

  257. VAG J, Freedman G, Szabo E, Romanszky L, et al
    Cervical tooth anatomy considerations for prefabricated anatomic healing abutment design: A mathematical formulation.
    J Prosthet Dent. 2022;127:852-859.
    >> Share

    May 2022
  258. RAWAL S
    Guided innovations: Robot-assisted dental implant surgery.
    J Prosthet Dent. 2022 May 25. pii: S0022-3913(22)00212.
    >> Share

  259. WANG X, Shujaat S, Shaheen E, Jacobs R, et al
    Quality and haptic feedback of three-dimensionally printed models for simulating dental implant surgery.
    J Prosthet Dent. 2022 May 2. pii: S0022-3913(22)00201.
    >> Share

  260. YU W, Li X, Ma X, Xu X, et al
    Biomechanical analysis of inclined and cantilever design with different implant framework materials in mandibular complete-arch implant restorations.
    J Prosthet Dent. 2022;127:783.
    >> Share

  261. IDRIS RI, Shoji Y, Lim TW
    Occlusal force and occlusal contact reestablishment with resin-bonded fixed partial dental prostheses using the Dahl concept: A clinical study.
    J Prosthet Dent. 2022;127:737-743.
    >> Share

  262. DASHTI H, Rajati Haghi H, Nakhaei M, Kiamanesh E, et al
    A combined digital technique to fabricate an implant-retained auricular prosthesis for rehabilitation of hemifacial microsomia.
    J Prosthet Dent. 2022;127:807-810.
    >> Share

  263. YOUNY LEE SK, Voltidi E, Rasmussen C, Muller O, et al
    Serializing prosthetic rehabilitations to minimize time for patients with a maxillectomy without dentoalveolar support.
    J Prosthet Dent. 2022;127:803-806.
    >> Share

  264. LEVEN J, Ali R, Butterworth CJ
    Zygomatic implant-supported prosthodontic rehabilitation of edentulous patients with a history of cleft palate: A clinical report.
    J Prosthet Dent. 2022;127:684-688.
    >> Share

  265. YIN L, Zhu Y, Yu H, Qiu L, et al
    Evaluating the efficiency of three methods to clean and disinfect screw- and cement-retained prostheses.
    J Prosthet Dent. 2022;127:775-782.
    >> Share

  266. WANG J, Fang M, Xin H, Liu LP, et al
    Use of a digitally guided triple technique for bone reduction, implant placement, and immediate interim prostheses in complete-arch implant surgery.
    J Prosthet Dent. 2022;127:703-708.
    >> Share

  267. MORENO SORIANO C, Castaneda Vega P, Estrugo Devesa A, Jane Salas E, et al
    Frequency and type of digital procedures used for the intraoral prosthetic rehabilitation of patients with head and neck cancer: A systematic review.
    J Prosthet Dent. 2022;127:811-815.
    >> Share

  268. LIU X, Peng D, Ge Y, Feng H, et al
    Reversal of the intrusion of a natural tooth located between two implant-supported crowns: A 7-year follow-up report.
    J Prosthet Dent. 2022;127:680-683.
    >> Share

    April 2022
  269. CARNEIRO-CAMPOS LE, Freitas-Fernandes LB, Fernandes CP, Zanetta-Barbosa D, et al
    Evaluation of mandibular implant-supported fixed prosthesis retained by 3 dental implants, 1 straight and 2 angled: A retrospective clinical study.
    J Prosthet Dent. 2022 Apr 14. pii: S0022-3913(22)00148.
    >> Share

  270. OMAISH HHM, Abdelhamid AM, Neena AF
    Comparison of the strain developed around implants with angled abutments with two reinforced polymeric CAD-CAM superstructure materials: An in vitro comparative study.
    J Prosthet Dent. 2022;127:634.
    >> Share

  271. LIM TW, Ab Ghani SM, Mahmud M
    Response to letter to Editor on "Occlusal re-establishment and clinical complications of resin-bonded fixed partial dental prostheses (RBFPDP) cemented at an increased occlusal vertical dimension (OVD)".
    J Prosthet Dent. 2022;127:671-672.
    >> Share

  272. HABIB S, Javed F, Khan FR
    Comments on "Occlusal re-establishment and clinical complications of resin-bonded fixed partial dental prostheses (RBFPDP) cemented at an increased occlusal vertical dimension (OVD)".
    J Prosthet Dent. 2022;127:670-671.
    >> Share

  273. BERNAL G, Salazar C, Sadowsky SJ
    A custom screw-retained implant-supported prosthesis for a patient with amelogenesis imperfecta: An 8-year clinical follow-up.
    J Prosthet Dent. 2022;127:533-537.
    >> Share

  274. BORGES GA, Barbin T, Dini C, Maia LC, et al
    Patient-reported outcome measures and clinical assessment of implant-supported overdentures and fixed prostheses in mandibular edentulous patients: A systematic review and meta-analysis.
    J Prosthet Dent. 2022;127:565-577.
    >> Share

  275. NEGREIROS WM, Hamilton A, Gallucci GO
    A completely digital workflow for the transition from a failed dentition to interim complete-arch fixed implant-supported prostheses: A clinical report.
    J Prosthet Dent. 2022;127:527-532.
    >> Share

  276. ABDEL RAHEEM IM, Darwish RM
    Fabrication of additively manufactured custom impression copings based on stock abutments.
    J Prosthet Dent. 2022;127:560-564.
    >> Share

  277. SINGH K, Dua P, Prakash P, Kumar RV, et al
    Custom-fabricated nasal conformers and surgical stents in the management of midfacial acid burn injuries: A clinical report.
    J Prosthet Dent. 2022;127:660-663.
    >> Share

  278. HONG SJ, Lee H, Lee YY, Kwon KR, et al
    Retention force and stress distribution analysis of the cementless double crown-type implant-supported prosthesis.
    J Prosthet Dent. 2022;127:626-633.
    >> Share

  279. RONG R, Lin TY, Sa Y
    Using an existing digital surgical guide and used burs as aids for a complete-arch implant impression.
    J Prosthet Dent. 2022;127:664-666.
    >> Share

  280. CHANG HC, Chang CH, Li HY, Wang CH, et al
    Biomechanical analysis of the press-fit effect in a conical Morse taper implant system by using an in vitro experimental test and finite element analysis.
    J Prosthet Dent. 2022;127:601-608.
    >> Share

  281. POLARA G, Pistone F, Giorgio Alfredo S
    Digital immediate tooth restoration: Fabricating acrylic resin interim crowns from CBCT scans for immediate implant-supported prostheses: A case series.
    J Prosthet Dent. 2022;127:578-584.
    >> Share

  282. KHAMIS MM, Zakaria NH
    Effect of screw access channel on the fracture rate of lithium disilicate cement-retained implant-supported posterior crowns.
    J Prosthet Dent. 2022;127:618-625.
    >> Share

    March 2022
  283. SUN F, Cheng W, Zhao B, Lin Z, et al
    Fatigue properties of plasma nitriding for dental implant application.
    J Prosthet Dent. 2022 Mar 23. pii: S0022-3913(22)00068.
    >> Share

  284. VERMA M, Faraz F, Bhardwaj S, Sood A, et al
    Evaluation of safety and efficacy of locally developed dental implants: A noninferiority randomized controlled trial.
    J Prosthet Dent. 2022 Mar 9. pii: S0022-3913(22)00056.
    >> Share

  285. ARMENTIA M, Abasolo M, Coria I, Sainitier N, et al
    Effect of the geometry of butt-joint implant-supported restorations on the fatigue life of prosthetic screws.
    J Prosthet Dent. 2022;127:477.
    >> Share

  286. VILLARROEL M, Esquivel J
    The biotransfer approach: The use of an alveolar cast die for the fabrication of the emergence profile on implant-supported interim restorations.
    J Prosthet Dent. 2022;127:404-407.
    >> Share

  287. BOMPOLAKI D, Edmondson SA, Katancik JA
    Interproximal contact loss between implant-supported restorations and adjacent natural teeth: A retrospective cross-sectional study of 83 restorations with an up to 10-year follow-up.
    J Prosthet Dent. 2022;127:418-424.
    >> Share

  288. VITOMIR KS, Filip I, Vojkan L, Igor D, et al
    Survival rate of disk and screw-type implants used for the retention of extraoral prostheses.
    J Prosthet Dent. 2022;127:499-507.
    >> Share

  289. KO KH, Huh YH, Park CJ, Cho LR, et al
    Effect of materials on axial displacement and internal discrepancy of cement-retained implant-supported prostheses.
    J Prosthet Dent. 2022;127:462-469.
    >> Share

  290. LIU X, Liu J, Feng H, Pan S, et al
    Accuracy of a milled digital implant surgical guide: An in vitro study.
    J Prosthet Dent. 2022;127:453-461.
    >> Share

  291. FU X, Yang J, Luo J, Zhang Y, et al
    Three-dimensional facial esthetics-driven computer-assisted osteotomy and implant placement for immediate restoration of a failing dentition with a protruded maxilla.
    J Prosthet Dent. 2022;127:392-397.
    >> Share

  292. ORTEGA-MARTINEZ J, Delgado LM, Ortiz-Hernandez M, Punset M, et al
    In vitro assessment of PEEK and titanium implant abutments: Screw loosening and microleakage evaluations under dynamic mechanical testing.
    J Prosthet Dent. 2022;127:470-476.
    >> Share

  293. NEGREIROS WA, Teixeira RR, Peixoto RF, Regis RR, et al
    The challenge of managing oral maxillofacial rehabilitation with quality and cost-benefit.
    J Prosthet Dent. 2022;127:508-514.
    >> Share

  294. GOMES JML, Limirio JPJO, Lemos CAA, Moraes SLD, et al
    Response to the "Letter to the Editor" regarding the article: Pellizzer EP, et al. The influence of crown-to-implant ratio in single crowns on clinical outcomes: A systematic review and meta-analysis. J Prosthet Dent 2021;126:497-502.
    J Prosthet Dent. 2022;127:524-525.
    >> Share

  295. SADOWSKY SJ
    Comments regarding: Pellizzer EP, Marcela de Luna Gomes J, Araujo Lemos CA, Minatel L, Justino de Oliveira Limirio JP, Dantas de Moraes SL. The influence of crown-to-implant ratio in single crowns on clinical outcomes: A systematic review and meta-ana
    J Prosthet Dent. 2022;127:524.
    >> Share

  296. LEE JH
    Design concept to facilitate the positioning of a custom abutment on an implant.
    J Prosthet Dent. 2022;127:517-519.
    >> Share

    February 2022
  297. GOODACRE BJ
    Digital workflow for 3D printed implant surgical guides.
    J Prosthet Dent. 2022;127:205.
    >> Share

  298. DA SILVA GG, Shimano MVW, Macedo AP, da Costa Valente ML, et al
    In vitro assessment of polyetheretherketone for an attachment component for an implant-retained overdenture.
    J Prosthet Dent. 2022;127:319.
    >> Share

  299. DE SOUZA RENDOHL E, Brandt WC
    Author response to letter to the editor about the article "Stress distribution with extra-short implants in an angled frictional system: A finite element analysis study".
    J Prosthet Dent. 2022;127:379-380.
    >> Share

  300. CECATO RC, de Souza Wiggers W, Miura A
    Letter to the editor about the article "Stress distribution with extra-short implants in an angled frictional system: A finite element analysis study".
    J Prosthet Dent. 2022;127:375-379.
    >> Share

  301. GARCIA-GONZALEZ M, Gonzalez-Gonzalez I, Garcia-Garcia I, Blason-Gonzalez S, et al
    Effect of abutment finish lines on the mechanical behavior and marginal fit of screw-retained implant crowns: An in vitro study.
    J Prosthet Dent. 2022;127:318.
    >> Share

  302. MARTIN-ORTEGA N, Sallorenzo A, Casajus J, Cervera A, et al
    Fracture resistance of additive manufactured and milled implant-supported interim crowns.
    J Prosthet Dent. 2022;127:267-274.
    >> Share

  303. REVILLA-LEON M, Abaei DS, Tittle A, Zandinejad A, et al
    Additively manufactured implant abutment screw-access guide to remove a cement-retained implant crown: A technique.
    J Prosthet Dent. 2022;127:219-222.
    >> Share

  304. ZHANG J, Chen L, Tang H, Zhang R, et al
    An alternative technique for fabricating an implant-supported interim prosthesis by using a fully digital approach.
    J Prosthet Dent. 2022;127:228-232.
    >> Share

  305. LEE JH
    Digital approach to fabricating a retrofitted abutment for reuse of an existing implant-supported fixed partial denture after the failure of an implant.
    J Prosthet Dent. 2022;127:223-227.
    >> Share

  306. CHEN X, Wang F, Sun F, Zhang L, et al
    Digital fabrication of an adult speech aid prosthesis by using a 3-dimensionally printed polyetheretherketone framework.
    J Prosthet Dent. 2022;127:358-361.
    >> Share

  307. SILVA GC
    A straightforward technique to obtain a subgingival nonglazed polished zirconia area in monolithic implant-supported prostheses.
    J Prosthet Dent. 2022;127:368-370.
    >> Share

  308. YU P, Zhi Li, Tan X, Yu H, et al
    Effect of sealing gel on the microleakage resistance and mechanical behavior during dynamic loading of 3 implant systems.
    J Prosthet Dent. 2022;127:308-317.
    >> Share

    January 2022
  309. LIN IP, Chang CC, Tu CC, Lai CL, et al
    Efficacy of free gingival grafting to augment keratinized mucosa around dental implants in posterior regions after restorative procedures: A retrospective clinical study.
    J Prosthet Dent. 2022 Jan 6. pii: S0022-3913(21)00705.
    >> Share

  310. SIQUEIRA AP, Pacheco de Oliveira Mota V, de-Azevedo-Vaz SL
    Influence of radiographic acquisition methods and visualization software programs on the detection of misfits at the implant-abutment interface: An ex vivo study.
    J Prosthet Dent. 2022;127:107.
    >> Share

  311. YILMAZ B, Diker E, Ovchinnik V, Abou-Ayash S, et al
    Management of a partially edentulous patient with idiopathic root resorption by using digital and conventional implant planning technologies.
    J Prosthet Dent. 2022;127:15-21.
    >> Share

  312. JACOBS N, Seghi R, Johnston WM, Yilmaz B, et al
    Displacement and performance of abutments in narrow-diameter implants with different internal connections.
    J Prosthet Dent. 2022;127:100-106.
    >> Share

  313. PEREZ-GIUGOVAZ MG, Mosier M, Revilla-Leon M
    An additively manufactured intraoral scan body for aiding complete-arch intraoral implant digital scans with guided integration of 3D virtual representation.
    J Prosthet Dent. 2022;127:38-43.
    >> Share

  314. FUSCHETTO T, Kurtz KS, Delgado-Ruiz RA
    Implant and prosthetic rehabilitation of a patient with mucous membrane pemphigoid.
    J Prosthet Dent. 2022;127:22-26.
    >> Share

  315. KRAMER FERNANDEZ P, Kuscu E, Weise H, Engel EM, et al
    Rapid additive manufacturing of an obturator prosthesis with the use of an intraoral scanner: A dental technique.
    J Prosthet Dent. 2022;127:189-193.
    >> Share

  316. KHER U, Tunkiwala A, Patil PG
    Management of unfavorable implant positions and angulations in edentulous maxillae with different complete-arch fixed prosthetic designs: A case series and clinical guidelines.
    J Prosthet Dent. 2022;127:6-14.
    >> Share

  317. LEIGHTON Y, Carpio L, Weber B, Dias FJ, et al
    Clinical evaluation of single 4-mm implants in the posterior mandible: A 3-year follow-up pilot study.
    J Prosthet Dent. 2022;127:80-85.
    >> Share

  318. PACINELLI A, Bekov G, Nat NK, Guerrero D, et al
    A technique for identifying implant abutment screw heads and corresponding implant drivers by using colored polytetrafluorethylene tape.
    J Prosthet Dent. 2022;127:59-60.
    >> Share

  319. YEN JY, Kang L, Chou IC, Lai YL, et al
    Risk assessment of interproximal contact loss between implant-supported fixed prostheses and adjacent teeth: A retrospective radiographic study.
    J Prosthet Dent. 2022;127:86-92.
    >> Share

  320. GAIKWAD AM, Joshi AA, Nadgere JB
    Biomechanical and histomorphometric analysis of endosteal implants placed by using the osseodensification technique in animal models: A systematic review and meta-analysis.
    J Prosthet Dent. 2022;127:61-70.
    >> Share

  321. FEHMER V, Pitta J
    A technique for separating a ceramic implant-supported restoration from a titanium base abutment.
    J Prosthet Dent. 2022;127:194-195.
    >> Share

    December 2021
  322. JABLONSKI RY, Veale BJ, Coward TJ, Keeling AJ, et al
    Outcome measures in facial prosthesis research: A systematic review.
    J Prosthet Dent. 2021;126:805-815.
    >> Share

  323. BALDISSARA P, Koci B, Messias AM, Meneghello R, et al
    Assessment of impression material accuracy in complete-arch restorations on four implants.
    J Prosthet Dent. 2021;126:763-771.
    >> Share

  324. CARNEIRO PEREIRA AL, Medeiros VR, da Fonte Porto Carreiro A
    Influence of implant position on the accuracy of intraoral scanning in fully edentulous arches: A systematic review.
    J Prosthet Dent. 2021;126:749-755.
    >> Share

  325. CHU SJ
    Inverted body-shift concept in macroimplant design to enhance biologic and esthetic outcomes: A clinical report.
    J Prosthet Dent. 2021;126:720-726.
    >> Share

  326. DALY A, McCracken G, Abdulmohsen B
    Differences in treatment outcomes of definitive fixed implant-supported restorations with or without an interim restoration: A systematic review.
    J Prosthet Dent. 2021;126:735-741.
    >> Share

  327. FIGUERAS-ALVAREZ O, Canto-Naves O, Real-Voltas F, Roig M, et al
    Protocol for the clinical assessment of passive fit for multiple implant-supported prostheses: A dental technique.
    J Prosthet Dent. 2021;126:727-730.
    >> Share

  328. CAO ZL, Li X, Lin LJ, Chen YH, et al
    Immediate or delayed loading protocols for two-implant mandibular overdentures: A systematic review and meta-analysis of randomized controlled trials.
    J Prosthet Dent. 2021;126:742-748.
    >> Share

  329. DEL RIO SILVA L, Veloso DV, Barbin T, Borges GA, et al
    Can ceramic veneer spark erosion and mechanical cycling affect the accuracy of milled complete-arch frameworks supported by 6 implants?
    J Prosthet Dent. 2021;126:772-778.
    >> Share

  330. LIU Y, Ye H, Wang S, Zhang L, et al
    An open protocol for evaluating the accuracy of guided implant surgery by using digital casts.
    J Prosthet Dent. 2021;126:731-734.
    >> Share

  331. GAIKWAD AM, Joshi AA, Nadgere JB
    Cast metal sprue as an alternative to dental floss for splinting open tray impression copings for complete-arch implant impressions.
    J Prosthet Dent. 2021;126:816-818.
    >> Share

    November 2021
  332. KUL E, Korkmaz IH
    Effect of different design of abutment and implant on stress distribution in 2 implants and peripheral bone: A finite element analysis study.
    J Prosthet Dent. 2021;126:664.
    >> Share

  333. TOWITHELERTKUL C, Chugh A, Hattori M, Yoshimura R, et al
    A custom-made brachytherapy applicator for recurrent endometrial and vaginal cancer: A dental technique for prosthesis fabrication.
    J Prosthet Dent. 2021;126:711-714.
    >> Share

  334. CICERO E, El Rafie K, De Souza A, Kawabe Y, et al
    Optimizing the esthetic outcome by using screw-retained implant abutment crowns: A 3-year clinical follow-up.
    J Prosthet Dent. 2021;126:608-615.
    >> Share

  335. FERREIRA DE ALMEIDA DC, Calasans-Maia MD, Zimmermann D, Moraschini V, et al
    A completely digital approach to replicating functional and esthetic parameters in mandibular implant-supported complete-arch prostheses.
    J Prosthet Dent. 2021;126:622-625.
    >> Share

  336. GAIKWAD AM, Joshi AA, Padhye AM, Nadgere JB, et al
    Autogenous bone ring for vertical bone augmentation procedure with simultaneous implant placement: A systematic review of histologic and histomorphometric outcomes in animal studies.
    J Prosthet Dent. 2021;126:626-635.
    >> Share

  337. ZHANG X, Wang M, Mo A
    An alternative method for immediate implant-supported restoration of anterior teeth assisted by fully guided templates: A clinical study.
    J Prosthet Dent. 2021;126:636-645.
    >> Share

    October 2021
  338. KANE B, Shah KC
    A dual scan approach to creating an accurate dental surface for virtual implant planning: A dental technique.
    J Prosthet Dent. 2021;126:464-470.
    >> Share

  339. RATHE F, Ratka C, Kaesmacher C, Winter A, et al
    Influence of different agents on the preload force of implant abutment screws.
    J Prosthet Dent. 2021;126:581-585.
    >> Share

  340. KHOURY-RIBAS L, Ayuso-Montero R, Willaert E, Peraire M, et al
    Masticatory rhythm 3 months after treatment with unilateral implant-supported fixed partial prosthesis: A clinical study.
    J Prosthet Dent. 2021;126:553-559.
    >> Share

  341. BAUER R, Zacher J, Strasser T, Rosentritt M, et al
    In vitro performance and fracture resistance of interim conventional or CAD-CAM implant-supported screw- or cement-retained anterior fixed partial dentures.
    J Prosthet Dent. 2021;126:575-580.
    >> Share

  342. VETROMILLA BM, Mazzetti T, Pereira-Cenci T
    Short versus standard implants associated with sinus floor elevation: An umbrella review of meta-analyses of multiple outcomes.
    J Prosthet Dent. 2021;126:503-511.
    >> Share

  343. PELLIZZER EP, Marcela de Luna Gomes J, Araujo Lemos CA, Minatel L, et al
    The influence of crown-to-implant ratio in single crowns on clinical outcomes: A systematic review and meta-analysis.
    J Prosthet Dent. 2021;126:497-502.
    >> Share

    September 2021
  344. SIMOES IG, Dos Reis AC, da Costa Valente ML
    Analysis of the influence of surface treatment by high-power laser irradiation on the surface properties of titanium dental implants: A systematic review.
    J Prosthet Dent. 2021 Sep 4. pii: S0022-3913(21)00421.
    >> Share

  345. WADHWANI CPK, Frantz WT, Schoenbaum TR, Rosen PS, et al
    Effect of activation rate on output torque values from a dental implant toggle-style torque wrench.
    J Prosthet Dent. 2021 Sep 2. pii: S0022-3913(21)00393.
    >> Share

  346. GAJIWALA M, Paliwal J, Husain SY, Dadarwal A, et al
    Influence of surface modification of titanium implants on improving osseointegration: An in vitro study.
    J Prosthet Dent. 2021;126:405.
    >> Share

  347. MALATEAUX G, Salazar-Gamarra R, de Souza Silva J, Gallego Arias Pecorari V, et al
    Ultraviolet C as a method of disinfecting medical silicone used in facial prostheses: An in vitro study.
    J Prosthet Dent. 2021;126:452.
    >> Share

  348. KUO HY, Kuo PJ, Bittner N, Cavallaro J, et al
    Assessment of the changes in retention and surface topography of attachments for maxillary 4-implant-retained overdentures.
    J Prosthet Dent. 2021;126:413.
    >> Share

  349. STANGLER M, Bidra AS
    Full arch monolithic zirconia prosthesis in a patient with bilateral cleft palate: A clinical report.
    J Prosthet Dent. 2021;126:265-270.
    >> Share

  350. GIBREEL M, Lassila LVJ, Narhi TO, Perea-Lowery L, et al
    Midline denture base strains of glass fiber-reinforced single implant-supported overdentures.
    J Prosthet Dent. 2021;126:407-412.
    >> Share

  351. GUENTSCH A, Sukhtankar L, An H, Luepke PG, et al
    Precision and trueness of implant placement with and without static surgical guides: An in vitro study.
    J Prosthet Dent. 2021;126:398-404.
    >> Share

  352. ALQUTAIBI AY, Alnazzawi AA, Algabri R, Aboalrejal AN, et al
    Clinical performance of single implant-supported ceramic and metal-ceramic crowns: A systematic review and meta-analysis of randomized clinical trials.
    J Prosthet Dent. 2021;126:369-376.
    >> Share

    August 2021
  353. KOKA S, Bensoussan J, Curtis D
    Influence of clinician gender, age, and geographic work location on the relative rankings of risk factors for biological complications with dental implant therapy.
    J Prosthet Dent. 2021 Aug 3. pii: S0022-3913(21)00344.
    >> Share

  354. SILVA LS, Verri FR, Lemos CAA, Martins CM, et al
    Biomechanical effect of an occlusal device for patients with an implant-supported fixed dental prosthesis under parafunctional loading: A 3D finite element analysis.
    J Prosthet Dent. 2021;126:223.
    >> Share

  355. BATAK B, Cakmak G, Johnston WM, Yilmaz B, et al
    Surface roughness of high-performance polymers used for fixed implant-supported prostheses.
    J Prosthet Dent. 2021;126:254.
    >> Share

  356. MURAT S, Batak B
    Fabrication of a 3-dimensionally printed definitive cast for an obturator prosthesis by merging intraoral scan image with cone beam computed tomography data: A clinical report.
    J Prosthet Dent. 2021;126:256.
    >> Share

  357. VAKOU D, Sykaras N
    Removal of damaged implant components with a custom-made screwdriver.
    J Prosthet Dent. 2021;126:262-263.
    >> Share

  358. YE H, Wang Z, Sun Y, Zhou Y, et al
    Fully digital workflow for the design and manufacture of prostheses for maxillectomy defects.
    J Prosthet Dent. 2021;126:257-261.
    >> Share

  359. SADOWSKY SJ, Brunski JB
    Are teeth superior to implants? A mapping review.
    J Prosthet Dent. 2021;126:181-187.
    >> Share

  360. YANG Z, Liu M, Liu X, Tan J, et al
    An auxiliary device for screw-retained fixed implant restorations which prevents extrusion of cement into screw-access openings.
    J Prosthet Dent. 2021;126:178-180.
    >> Share

  361. ORGEV A, Gonzaga L, Martin W, Morton D, et al
    Addition of an irrigation channel to a surgical template to facilitate cooling during implant osteotomy.
    J Prosthet Dent. 2021;126:164-166.
    >> Share

  362. RAMMELSBERG P, Meyer A, Lorenzo-Bermejo J, Kappel S, et al
    Long-term chipping and failure rates of implant-supported and combined tooth-implant-supported metal-ceramic and ceramic fixed dental prostheses: A cohort study.
    J Prosthet Dent. 2021;126:196-203.
    >> Share

  363. SCHIMMEL M, Janner SFM, Joda T, Wittneben JG, et al
    Mandibular implant-supported fixed complete dental prostheses on implants with ultrashort and standard length: A pilot treatment.
    J Prosthet Dent. 2021;126:137-143.
    >> Share

  364. DE-AZEVEDO-VAZ SL, Araujo-Siqueira C, Carneiro VC, Oliveira ML, et al
    Misfit detection in implant-supported prostheses of different compositions by periapical radiography and cone beam computed tomography: An in vitro study.
    J Prosthet Dent. 2021;126:205-213.
    >> Share

  365. GRANATA S, Sforza NM, Giberti L, Stellini E, et al
    Computer-guided implant surgery for immediate implanting and loading: The STIL technique.
    J Prosthet Dent. 2021;126:155-163.
    >> Share

    July 2021
  366. SALES PHDH, Barros AWP, de Lima FJC, Carvalho AAT, et al
    Is Down syndrome a risk factor or contraindication for dental implants? A systematic review.
    J Prosthet Dent. 2021 Jul 28. pii: S0022-3913(21)00348.
    >> Share

  367. ARMENTIA M, Abasolo M, Coria I, Albizuri J, et al
    Fatigue performance of prosthetic screws used in dental implant restorations: Rolled versus cut threads.
    J Prosthet Dent. 2021 Jul 23. pii: S0022-3913(21)00353.
    >> Share

  368. RAJU K, Mani UM, Vaidyanathan AK
    Evaluating the osteogenic potential of insulin-like growth factor-1 microspheres on osteoblastic activity around dental implants in patients with type 2 diabetes mellitus using bone scintigraphy: A split-mouth randomized controlled trial.
    J Prosthet Dent. 2021 Jul 19. pii: S0022-3913(21)00335.
    >> Share

  369. AGRAWAL KK, Chand P, Singh SV, Singh N, et al
    Association of interleukin-1, interleukin-6, collagen type I alpha 1, and osteocalcin gene polymorphisms with early crestal bone loss around submerged dental implants: A nested case control study.
    J Prosthet Dent. 2021 Jul 8. pii: S0022-3913(21)00321.
    >> Share

  370. MAJHI R, Majhi RK, Garhnayak L, Patro TK, et al
    Comparative evaluation of surface-modified zirconia for the growth of bone cells and early osseointegration.
    J Prosthet Dent. 2021;126:92.
    >> Share

  371. ALONSO-PEREZ R, Bartolome JF, Fraile C, Pradies G, et al
    Original versus nonoriginal cast-to-gold abutment-implant connection: Analysis of the internal fit and long-term fatigue performance.
    J Prosthet Dent. 2021;126:94.
    >> Share

  372. TAHA D, Sabet A
    In vitro evaluation of material dependent force damping behavior of implant-supported restorations using different CAD-CAM materials and luting conditions.
    J Prosthet Dent. 2021;126:93.
    >> Share

  373. OH YK, Bae EB, Huh JB
    Retrospective clinical evaluation of implant-assisted removable partial dentures combined with implant surveyed prostheses.
    J Prosthet Dent. 2021;126:76-82.
    >> Share

  374. PUNJ A, Bompolaki D, Kurtz KS
    Dentist-laboratory communication and quality assessment of removable prostheses in Oregon: A cross-sectional pilot study.
    J Prosthet Dent. 2021;126:103-109.
    >> Share

  375. ELKOMY MM, Khamis MM, El-Sharkawy AM
    Clinical and radiographic evaluation of implants placed with fully guided versus partially guided tissue-supported surgical guides: A split-mouth clinical study.
    J Prosthet Dent. 2021;126:58-66.
    >> Share

  376. JAGATHPAL AJ, Vally ZI, Sykes LM, du Toit J, et al
    Comparison of excess cement around implant crown margins by using 3 extraoral cementation techniques.
    J Prosthet Dent. 2021;126:95-101.
    >> Share

  377. SIGNORINI L, Faustini F, Samarani R, Grandi T, et al
    Immediate fixed rehabilitation supported by pterygoid implants for participants with severe maxillary atrophy: 1-Year postloading results from a prospective cohort study.
    J Prosthet Dent. 2021;126:67-75.
    >> Share

  378. BHATTACHARJEE B, Saneja R, Bhatnagar A, Gupta P, et al
    Response to the letter to the editor regarding "Concerns regarding the published article 'Effect of dopaminergic agonist group of drugs in treatment of sleep bruxism: A systematic review' by Bhattacharjee et al. J Prosthet Dent. 2021 Jan 14:S0022-3913
    J Prosthet Dent. 2021;126:135-136.
    >> Share

  379. REAL-VOLTAS F, Sabria-Girbal S
    A straightforward technique for removing the screw-retaining protective material of an implant-supported restoration channel with cut-and-used endodontic rotary files.
    J Prosthet Dent. 2021;126:133.
    >> Share

    June 2021
  380. SA Y, Morton D, Lin WS
    Using existing interim complete dentures as an aid for an interocclusal record to align edentulous intraoral scans for implant-retained overdentures.
    J Prosthet Dent. 2021;125:854-857.
    >> Share

  381. UNKOVSKIY A, Wahl E, Huettig F, Keutel C, et al
    Multimaterial 3D printing of a definitive silicone auricular prosthesis: An improved technique.
    J Prosthet Dent. 2021;125:946-950.
    >> Share

  382. FIGUERAS-ALVAREZ O, Real-Voltas F, Cabratosa-Termes J, Roig M, et al
    A method for determining the position of the abutment screw of any cement-retained implant-supported prosthesis.
    J Prosthet Dent. 2021;125:846-848.
    >> Share

  383. GALIBOURG A, Dumoncel J, Cormary J, Maret D, et al
    Volume of unsupported peri-implant soft tissue over time: A cross-sectional observation study.
    J Prosthet Dent. 2021;125:883-889.
    >> Share

  384. HERSCHDORFER L, Negreiros WM, Gallucci GO, Hamilton A, et al
    Comparison of the accuracy of implants placed with CAD-CAM surgical templates manufactured with various 3D printers: An in vitro study.
    J Prosthet Dent. 2021;125:905-910.
    >> Share

  385. REVILLA-LEON M, Smith Z, Methani MM, Zandinejad A, et al
    Influence of scan body design on accuracy of the implant position as transferred to a virtual definitive implant cast.
    J Prosthet Dent. 2021;125:918-923.
    >> Share

  386. HSIAO CC, Liang CH, Shen YF, Hsu KW, et al
    Retrospective comparison of posterior fixed dental prostheses supported by two different titanium abutments on tissue level implants.
    J Prosthet Dent. 2021;125:877-882.
    >> Share

    May 2021
  387. SULTAN S, Hegazy M, Shakal M, Magdy S, et al
    Effect of virtual cement gap settings on the marginal fit of cemented resin-ceramic crowns on implant abutments.
    J Prosthet Dent. 2021;125:804.
    >> Share

  388. CINQUANTA L, Varoni EM, Barbieri C, Sardella A, et al
    Patient attitude and habits regarding removable denture home hygiene and correlation with prosthesis cleanliness: A cross-sectional study of elderly Italians.
    J Prosthet Dent. 2021;125:772.
    >> Share

  389. BORGES GA, Costa RC, Nagay BE, Magno MB, et al
    Long-term outcomes of different loading protocols for implant-supported mandibular overdentures: A systematic review and meta-analysis.
    J Prosthet Dent. 2021;125:732-745.
    >> Share

  390. GHOSH M, Kaur H, Dua M, Nanda A, et al
    Cranioplast fabrication in a comatose patient: A clinical report.
    J Prosthet Dent. 2021;125:834-838.
    >> Share

  391. MOURA GF, Siqueira R, Meirelles L, Maska B, et al
    Denture scanning technique for computer-guided implant-supported restoration treatment of edentulous patients.
    J Prosthet Dent. 2021;125:726-731.
    >> Share

  392. YEUNG S, Aghvinian R, Aalam AA, Jivraj S, et al
    CAD-CAM approach to designing and fabricating a low-maintenance metal-acrylic resin implant-supported fixed complete dental prosthesis: A clinical report.
    J Prosthet Dent. 2021;125:719-722.
    >> Share

  393. REVILLA-LEON M, Sanchez-Rubio JL, Perez-Lopez J, Rubenstein J, et al
    Discrepancy at the implant abutment-prosthesis interface of complete-arch cobalt-chromium implant frameworks fabricated by additive and subtractive technologies before and after ceramic veneering.
    J Prosthet Dent. 2021;125:795-803.
    >> Share

  394. FIGUERAS-ALVAREZ O, Brufau-Cochs A
    A straightforward technique for avoiding the need for a prototype when fabricating monolithic prostheses.
    J Prosthet Dent. 2021;125:839-840.
    >> Share

    April 2021
  395. VELLOSO G, Zimmermann D, Shibli JA, Dias AT, et al
    A multifunctional guided surgery to assist in the 3-dimensional positioning of dental implants and in obtaining a palatal gingival graft.
    J Prosthet Dent. 2021 Apr 28. pii: S0022-3913(21)00158.
    >> Share

  396. LEE HY, Yang SW, Kang YJ, Oh KC, et al
    Influence of shoulder coverage difference of abutment on stress distribution and screw stability in tissue-level internal connection implants: A finite element analysis and in vitro study.
    J Prosthet Dent. 2021;125:682.
    >> Share

  397. SWELEM AA, Abdelnabi MH
    Attachment-retained removable prostheses: Patient satisfaction and quality of life assessment.
    J Prosthet Dent. 2021;125:636-644.
    >> Share

  398. BANNINK T, Bouman S, Wolterink R, van Veen R, et al
    Implementation of 3D technologies in the workflow of auricular prosthetics: A method using optical scanning and stereolithography 3D printing.
    J Prosthet Dent. 2021;125:708-713.
    >> Share

  399. SWAMIDASS RS, Kan JYK, Kattadiyil MT, Goodacre CJ, et al
    Abutment screw torque changes with straight and angled screw-access channels.
    J Prosthet Dent. 2021;125:675-681.
    >> Share

  400. SARHAN MM, Khamis MM, El-Sharkawy AM
    Evaluation of the accuracy of implant placement by using fully guided versus partially guided tissue-supported surgical guides with cylindrical versus C-shaped guiding holes: A split-mouth clinical study.
    J Prosthet Dent. 2021;125:620-627.
    >> Share

  401. LI J, Sommer C, Wang HL, Lepidi L, et al
    Creating a virtual patient for completely edentulous computer-aided implant surgery: A dental technique.
    J Prosthet Dent. 2021;125:564-568.
    >> Share

  402. STUMPEL LJ
    An open-source multifunctional registration device for implant-supported complete dentures.
    J Prosthet Dent. 2021;125:592-596.
    >> Share

  403. SHREEDHAR S, Raza FB, Vaidyanathan AK, Veeravalli PT, et al
    Effect of an implant-retained complete overdenture on the hearing ability of edentulous patients: A clinical pilot study.
    J Prosthet Dent. 2021;125:628-635.
    >> Share

  404. FIGUERAS-ALVAREZ O, Real-Voltas F
    Verification of the definitive cast during fabrication of implant-supported restorations.
    J Prosthet Dent. 2021;125:714-715.
    >> Share

    March 2021
  405. SANCAR B, Dayi E
    Evaluation of metal concentrations in hair and nails after dental implant placement.
    J Prosthet Dent. 2021 Mar 9. pii: S0022-3913(21)00012.
    >> Share

  406. BOLDING SL, Reebye UN
    Accuracy of haptic robotic guidance of dental implant surgery for completely edentulous arches.
    J Prosthet Dent. 2021 Mar 4. pii: S0022-3913(21)00056.
    >> Share

  407. OGUNC A, Yildirim Avcu G
    Effect of repeated firings on the marginal and internal adaptation of implant-supported metal-ceramic restorations fabricated with different thicknesses and fabrication methods.
    J Prosthet Dent. 2021;125:504.
    >> Share

  408. GHODSI S, Tanous M, Hajimahmoudi M, Mahgoli H, et al
    Effect of aging on fracture resistance and torque loss of restorations supported by zirconia and polyetheretherketone abutments: An in vitro study.
    J Prosthet Dent. 2021;125:501.
    >> Share

  409. GINER S, Bartolome JF, Gomez-Cogolludo P, Castellote C, et al
    Fatigue fracture resistance of titanium and chairside CAD-CAM zirconia implant abutments supporting zirconia crowns: An in vitro comparative and finite element analysis study.
    J Prosthet Dent. 2021;125:503.
    >> Share

  410. ALBAYRAK H, Gumus HO, Tasdemir Z
    Does abutment preparation affect abutment screw joint stability? An in vitro study.
    J Prosthet Dent. 2021;125:500.
    >> Share

  411. OYAR P, Durkan R, Deste G
    The effect of the design of a mandibular implant-supported zirconia prosthesis on stress distribution.
    J Prosthet Dent. 2021;125:502.
    >> Share

  412. KINCADE C, Karimi-Boushehri F, Osswald M, Nayar S, et al
    Use of digital technologies in fabrication of a custom healing stent after stage II implant surgery for advanced jaw reconstruction.
    J Prosthet Dent. 2021;125:545-550.
    >> Share

  413. O'BRIEN R, Wadhwani CPK, Rosen PS, Chung KH, et al
    Validating implant torque limiting devices with a custom tool: A dental technique.
    J Prosthet Dent. 2021;125:407-410.
    >> Share

  414. ALNASSER AH, Wadhwani CPK, Schoenbaum TR, Kattadiyil MT, et al
    Evaluation of implant abutment screw tightening protocols on reverse tightening values: An in vitro study.
    J Prosthet Dent. 2021;125:486-490.
    >> Share

  415. REVILLA-LEON M, Att W, Ozcan M, Rubenstein J, et al
    Comparison of conventional, photogrammetry, and intraoral scanning accuracy of complete-arch implant impression procedures evaluated with a coordinate measuring machine.
    J Prosthet Dent. 2021;125:470-478.
    >> Share

  416. BORGES GA, Presotto AGC, Caldas RA, Pisani MX, et al
    Is one dental mini-implant biomechanically appropriate for the retention of a mandibular overdenture? A comparison with Morse taper and external hexagon platforms.
    J Prosthet Dent. 2021;125:491-499.
    >> Share

  417. PARDAL-PELAEZ B, Flores-Fraile J, Pardal-Refoyo JL, Montero J, et al
    Implant loss and crestal bone loss in immediate versus delayed load in edentulous mandibles: A systematic review and meta-analysis.
    J Prosthet Dent. 2021;125:437-444.
    >> Share

  418. NEGREIROS WM, Jamjoom FZ, Gallucci G, Hamilton A, et al
    Designing a complete-arch digital trial tooth arrangement for completely edentulous patients by using an open-source CAD software program: A dental technique.
    J Prosthet Dent. 2021;125:387-391.
    >> Share

  419. LIU Y, Lin Y, Di P
    A modified implant abutment holder fabricated with fused deposition modeling to improve the transfer process for implant-supported restorations.
    J Prosthet Dent. 2021;125:411-414.
    >> Share

  420. KREVE S, Candido Dos Reis A
    Influence of the electrostatic condition of the titanium surface on bacterial adhesion: A systematic review.
    J Prosthet Dent. 2021;125:416-420.
    >> Share

  421. WANG T, Wang L, Lu Q, Fan Z, et al
    Influence of anodized titanium abutments on the esthetics of the peri-implant soft tissue: A clinical study.
    J Prosthet Dent. 2021;125:445-452.
    >> Share

  422. LEITE FJ, Martins W Jr, Rosin HR, Pires CR, et al
    A completely digital workflow for an interim implant-supported crown: A clinical report.
    J Prosthet Dent. 2021;125:377-382.
    >> Share

  423. CANULLO L, Annunziata M, Pesce P, Tommasato G, et al
    Influence of abutment material and modifications on peri-implant soft-tissue attachment: A systematic review and meta-analysis of histological animal studies.
    J Prosthet Dent. 2021;125:426-436.
    >> Share

  424. DIAS CORPA TARDELLI J, Lima da Costa Valente M, Theodoro de Oliveira T, Candido Dos Reis A, et al
    Influence of chemical composition on cell viability on titanium surfaces: A systematic review.
    J Prosthet Dent. 2021;125:421-425.
    >> Share

    February 2021
  425. MARKARIAN RA, Galles DP, Franca FMG
    Dental implant-abutment fracture resistance and wear induced by single-unit screw-retained CAD components fabricated by four CAM methods after mechanical cycling.
    J Prosthet Dent. 2021 Feb 24. pii: S0022-3913(21)00059.
    >> Share

  426. SINGH N, Agrawal KK, Chand P, Mishra N, et al
    Clinical outcomes of flap versus flapless immediately loaded single dental implants in the mandibular posterior region: One-year follow-up results from a randomized controlled trial.
    J Prosthet Dent. 2021 Feb 4. pii: S0022-3913(20)30618.
    >> Share

  427. HEIN D, Joly JC, Napimoga MH, Peruzzo DC, et al
    Influence of abutment angulation on loss of prosthetic abutment torque under mechanical cycling.
    J Prosthet Dent. 2021;125:349.
    >> Share

  428. TSO TV, Chao D, Tanner J, Freymiller EG, et al
    Prosthetic reconstruction of a patient with an irradiated total rhinectomy with navigated surgical placement of a single zygomatic implant: A clinical report.
    J Prosthet Dent. 2021;125:352-356.
    >> Share

  429. KIM BH, Lee BA, Choi SH, Kim YT, et al
    Complication rates for various retention types in anterior implant-supported prostheses: A retrospective clinical study.
    J Prosthet Dent. 2021;125:273-278.
    >> Share

  430. MCHUTCHION L, Aalto D
    Simulation of tissue-prosthesis margin interface by using surface scanning and digital design for auricular prostheses.
    J Prosthet Dent. 2021;125:361-372.
    >> Share

  431. SU FY, Tsai JC, Morton D, Lin WS, et al
    Use of intraoral scan for implant-supported dental prosthesis to design and fabricate a CAD-CAM verification device: A dental technique.
    J Prosthet Dent. 2021;125:204-207.
    >> Share

  432. CHEN PH, Seidenfaden JC, Sooudi I, Kase MT, et al
    Using digital technology to create a custom esthetic bandage for patients after rhinectomy.
    J Prosthet Dent. 2021;125:357-360.
    >> Share

  433. FABREGA J, Rios-Santos JV, Falcao C, Herrero-Climent M, et al
    A modified protocol for restorative implant abutment selection by using computer-aided design and computer-aided manufacturing technology.
    J Prosthet Dent. 2021;125:341-348.
    >> Share

  434. AHMED WM, Verhaeghe TV, McCullagh APG
    Maxillary complete-arch implant-supported restoration: A digital scanning and maxillomandibular relationship workflow.
    J Prosthet Dent. 2021;125:216-220.
    >> Share

  435. SANCHEZ-TORRES A, Cercadillo-Ibarguren I, Figueiredo R, Gay-Escoda C, et al
    Mechanical complications of implant-supported complete-arch restorations and impact on patient quality of life: A retrospective cohort study.
    J Prosthet Dent. 2021;125:279-286.
    >> Share

  436. JEONG SM, Kim YI, An X, Choi BH, et al
    Digital workflow for fabricating a verification device for an all-on-4 abutment: A dental technique.
    J Prosthet Dent. 2021;125:208-211.
    >> Share

  437. CUNHA RM, Souza FA, Hadad H, Poli PP, et al
    Accuracy evaluation of computer-guided implant surgery associated with prototyped surgical guides.
    J Prosthet Dent. 2021;125:266-272.
    >> Share

  438. BERETTA M, Poli PP, Tansella S, Aguzzi M, et al
    Cast-free digital workflow for implant-supported rehabilitation in a completely edentulous patient: A clinical report.
    J Prosthet Dent. 2021;125:197-203.
    >> Share

  439. SADOWSKY SJ
    Comments regarding: de Luna Gomes et al. Optimal number of implants for complete-arch implant supported prostheses with a follow-up of at least 5 years: A systematic review and meta-analysis. J Prosthet Dent 2019;121:766-74.
    J Prosthet Dent. 2021;125:375.
    >> Share

    January 2021
  440. PATIL PG, Seow LL, Uddanwadikar R, Ukey PD, et al
    Biomechanical behavior of mandibular overdenture retained by two standard implants or 2 mini implants: A 3-dimensional finite element analysis.
    J Prosthet Dent. 2021;125:138.
    >> Share

  441. LEMOS CAA, Verri FR, Noritomi PY, Kemmoku DT, et al
    Effect of bone quality and bone loss level around internal and external connection implants: A finite element analysis study.
    J Prosthet Dent. 2021;125:137.
    >> Share

  442. BASUNBUL A, Goktug G, Morgano SM
    Modification of denture teeth for improved occlusal stability of a maxillary removable complete denture opposed by a mandibular implant-supported fixed complete denture: A clinical report.
    J Prosthet Dent. 2021;125:22.
    >> Share

  443. YI Y, Heo SJ, Koak JY, Kim SK, et al
    Alternative approach to salvaging an implant with a fractured screw fragment: A clinical report.
    J Prosthet Dent. 2021;125:18-21.
    >> Share

  444. YUAN C, Wei L, Li X, Wang P, et al
    A technique for registering digital dental casts onto cone beam computed tomography scans with excessive metallic artifacts.
    J Prosthet Dent. 2021;125:29-33.
    >> Share

  445. GHEISARIFAR M, Thompson GA, Drago C, Tabatabaei F, et al
    In vitro study of surface alterations to polyetheretherketone and titanium and their effect upon human gingival fibroblasts.
    J Prosthet Dent. 2021;125:155-164.
    >> Share

  446. PETRIE CS, Nakatani B, Scott JM, Moniz J, et al
    A survey of US dental schools on predoctoral implant curricula with emphasis on diagnosing and treating implant complications.
    J Prosthet Dent. 2021;125:126-136.
    >> Share

  447. DA ROCHA JFSS, de Avila ED, Rigolin MSM, Barbugli PA, et al
    Biological and physicochemical implications of the aging process on titanium and zirconia implant material surfaces.
    J Prosthet Dent. 2021;125:165-174.
    >> Share

  448. AZPIAZU-FLORES FX, Mata-Mata SJ
    A straightforward approach to conservative screw access for implant-supported fixed complete dentures.
    J Prosthet Dent. 2021;125:194-196.
    >> Share

    December 2020
  449. CRUZ RS, Lemos CAA, de Luna Gomes JM, Fernandes E Oliveira HF, et al
    Clinical comparison between crestal and subcrestal dental implants: A systematic review and meta-analysis.
    J Prosthet Dent. 2020 Dec 24. pii: S0022-3913(20)30691.
    >> Share

  450. MAI HN, Lee DH
    Effects of supporting conditions and anchor microscrew on the stabilization of the implant guide template during the drilling process: An in vitro study.
    J Prosthet Dent. 2020;124:727.
    >> Share

  451. ISMAIL IA, Alhajj MN
    Accuracy of different impression techniques for multiunit implant restoration: A qualitative in vitro study.
    J Prosthet Dent. 2020;124:729.
    >> Share

  452. DE SOUZA RENDOHL E, Brandt WC
    Stress distribution with extra-short implants in an angled frictional system: A finite element analysis study.
    J Prosthet Dent. 2020;124:728.
    >> Share

  453. WADHWANI CPK, O'Brien RT, Rosen PS, Chung KH, et al
    A technique to validate the accuracy of a beam-type mechanical torque limiting device.
    J Prosthet Dent. 2020;124:647-652.
    >> Share

  454. SAMI T, Goldstein G, Vafiadis D, Absher T, et al
    An in vitro 3D evaluation of the accuracy of 4 intraoral optical scanners on a 6-implant model.
    J Prosthet Dent. 2020;124:748-754.
    >> Share

  455. STUMPEL LJ
    A prefabricated modular substructure for a 4-implant-supported fixed complete denture: A dental technique.
    J Prosthet Dent. 2020;124:637-641.
    >> Share

  456. BUKHARI SA, AlHelal A, Kattadiyil MT, Wadhwani CPK, et al
    An in vitro investigation comparing methods of minimizing excess luting agent for cement-retained implant-supported fixed partial dentures.
    J Prosthet Dent. 2020;124:706-715.
    >> Share

  457. BILMENOGLU C, Cilingir A, Geckili O, Bilhan H, et al
    In vitro comparison of trueness of 10 intraoral scanners for implant-supported complete-arch fixed dental prostheses.
    J Prosthet Dent. 2020;124:755-760.
    >> Share

  458. AGUSTIN-PANADERO R, Baixauli-Lopez M, Gomez-Polo M, Cabanes-Gumbau G, et al
    In vitro comparison of the efficacy of two fractured implant-prosthesis screw extraction methods: Conventional versus mechanical.
    J Prosthet Dent. 2020;124:720-726.
    >> Share

  459. GOLDSTEIN G, Ghoujal B, Abdullah S
    An in vitro assessment of the accuracy of new and in-use torque-limiting devices.
    J Prosthet Dent. 2020;124:716-719.
    >> Share

  460. RIBEIRO ROCHA GDS, Neves Duarte T, de Oliveira Correa G, Nampo FK, et al
    Chemical cleaning methods for prostheses colonized by Candida spp.: A systematic review.
    J Prosthet Dent. 2020;124:653-658.
    >> Share

  461. ZHANG X, Wang J, Wan Q, Li L, et al
    Guided residual root preparation for socket-shield procedures: A clinical report.
    J Prosthet Dent. 2020;124:625-631.
    >> Share

  462. SCHOENBAUM TR, Guichet DL, Jang JY, Kim YK, et al
    Clinician preferences for complete-arch fixed implant-supported prostheses: A survey of the membership of the Pacific Coast Society for Prosthodontics.
    J Prosthet Dent. 2020;124:699-705.
    >> Share

  463. TAHA A, Al-Shahat MA, Ghazy M
    Clinical and radiographic evaluations of implant-supported cantilever fixed partial dentures replacing maxillary anterior teeth: A randomized clinical trial.
    J Prosthet Dent. 2020;124:659-666.
    >> Share

  464. HARTMAN M
    Design and fabrication of a fixed implant-supported interim restoration from a dynamic navigation virtual plan.
    J Prosthet Dent. 2020;124:632-636.
    >> Share

  465. KHALID T, Yunus N, Ibrahim N, Saleh NBM, et al
    Assessment of masticatory function of mandibular implant-supported overdenture wearers: A 3-year prospective study.
    J Prosthet Dent. 2020;124:674-681.
    >> Share

  466. YILMAZ B, Wolfart S
    Response to Letter to the Editor regarding "Wolfart and Yilmaz: A technique for facilitating open-tray implant impressions. J Prosthet Dent 2019;122:417-9."
    J Prosthet Dent. 2020;124:820-821.
    >> Share

  467. RAJAGOPAL MP, Samuel P, Eranhikkal S, Nageshraj R, et al
    Letter to Editor: Concerns regarding the published article, "A technique for facilitating open tray implant impressions" by Wolfart et al.
    J Prosthet Dent. 2020;124:820.
    >> Share

  468. DE SOUZA BATISTA VE, Verri FR, Lemos CAA, Cruz RS, et al
    Response to Letter to the Editor regarding "de Souza Batista et al. Should the restoration of adjacent implants be splinted or nonsplinted? A systematic review and meta-analysis. J Prosthet Dent 2019;121:41-51".
    J Prosthet Dent. 2020;124:819.
    >> Share

  469. SADOWSKY SJ
    Comments regarding: de Souza Batista et al. Should the restoration of adjacent implants be splinted or nonsplinted? A systematic review and meta-analysis. J Prosthet Dent 2019;121:41-51.
    J Prosthet Dent. 2020;124:818.
    >> Share

    November 2020
  470. ABDEL RAHEEM IM, Hammad IA, Abel Kader SH, Fahmy RA, et al
    Fabrication of a CAD-CAM custom healing abutment guided by a conventional dental radiograph for delayed loaded dental implants: A dental technique.
    J Prosthet Dent. 2020 Nov 13. pii: S0022-3913(20)30563.
    >> Share

  471. XU X, Hu B, Xu Y, Liu Q, et al
    Short versus standard implants for single-crown restorations in the posterior region: A systematic review and meta-analysis.
    J Prosthet Dent. 2020;124:530-538.
    >> Share

  472. CHOCHLIDAKIS K, Einarsdottir E, Tsigarida A, Papaspyridakos P, et al
    Survival rates and prosthetic complications of implant fixed complete dental prostheses: An up to 5-year retrospective study.
    J Prosthet Dent. 2020;124:539-546.
    >> Share

  473. PAPASPYRIDAKOS P, Chen YW, Alshawaf B, Kang K, et al
    Digital workflow: In vitro accuracy of 3D printed casts generated from complete-arch digital implant scans.
    J Prosthet Dent. 2020;124:589-593.
    >> Share

  474. DE GROOT RJ, Rieger JM, Rosenberg AJWP, Merkx MAW, et al
    A pilot study of masticatory function after maxillectomy comparing rehabilitation with an obturator prosthesis and reconstruction with a digitally planned, prefabricated, free, vascularized fibula flap.
    J Prosthet Dent. 2020;124:616-622.
    >> Share

  475. OLIVARES JM, Valenzuela S, Benadof D, Sirhan MI, et al
    Resin cutback technique for interim implant-supported crowns.
    J Prosthet Dent. 2020;124:526-529.
    >> Share

  476. REVILLA-LEON M, Jiang P, Sadeghpour M, Piedra-Cascon W, et al
    Intraoral digital scans: Part 2-influence of ambient scanning light conditions on the mesh quality of different intraoral scanners.
    J Prosthet Dent. 2020;124:575-580.
    >> Share

  477. LUSTIG LL, Gozalo-Diaz D
    Creating QR-coded identification cards using CardExchange for straightforward identification of implant systems.
    J Prosthet Dent. 2020;124:623-624.
    >> Share

    October 2020
  478. YILDIRIM B
    Effect of porcelain firing and cementation on the marginal fit of implant-supported metal-ceramic restorations fabricated by additive or subtractive manufacturing methods.
    J Prosthet Dent. 2020;124:476.
    >> Share

  479. GAIKWAD AM, Joshi AA, Nadgere JB
    Orthodontic wire loop for engaging dental floss or orthodontic elastomeric chain in the open tray implant impression technique.
    J Prosthet Dent. 2020;124:500-501.
    >> Share

  480. CHO WT, Bae EB, Ahn JJ, Huh JB, et al
    Cordless digital workflow for scanning implant-supported prostheses at the abutment level: A dental technique.
    J Prosthet Dent. 2020;124:428-430.
    >> Share

  481. SUN F, Shen X, Zhou N, Gao Y, et al
    A speech bulb prosthesis for a soft palate defect with a polyetherketoneketone (PEKK) framework fabricated by multiple digital techniques: A clinical report.
    J Prosthet Dent. 2020;124:495-499.
    >> Share

  482. CABELLO-DOMINGUEZ G, Perez-Lopez J, Veiga-Lopez B, Gonzalez D, et al
    Maxillary zirconia and mandibular composite resin-lithium disilicate-modified PEEK fixed implant-supported restorations for a completely edentulous patient with an atrophic maxilla and mandible: A clinical report.
    J Prosthet Dent. 2020;124:403-410.
    >> Share

  483. DE OLIVEIRA LIMIRIO JPJ, Lemos CAA, de Luna Gomes JM, Minatel L, et al
    A clinical comparison of 1-piece versus 2-piece implants: A systematic review and meta-analysis.
    J Prosthet Dent. 2020;124:439-445.
    >> Share

  484. YU X, Han Y, Wang J
    Is an internal tapered connection more efficient than an internal nontapered connection? A systematic review and meta-analysis.
    J Prosthet Dent. 2020;124:431-438.
    >> Share

  485. ESPONA J, Roig E, Ali A, Roig M, et al
    Immediately loaded interim complete-arch implant-supported fixed dental prostheses fabricated with a completely digital workflow: A clinical technique.
    J Prosthet Dent. 2020;124:423-427.
    >> Share

  486. SHAO J, Zhang Y, Qing H, Li L, et al
    An alternative approach to transalveolar sinus elevation for the placement of multiple implants.
    J Prosthet Dent. 2020;124:416-422.
    >> Share

  487. MOREIRA DE MELO EJ JR, Francischone CE
    Three-dimensional finite element analysis of two angled narrow-diameter implant designs for an all-on-4 prosthesis.
    J Prosthet Dent. 2020;124:477-484.
    >> Share

    September 2020
  488. LEMOS CAA, Verri FR, de Oliveira Neto OB, Cruz RS, et al
    Clinical effect of the high insertion torque on dental implants: A systematic review and meta-analysis.
    J Prosthet Dent. 2020 Sep 8. pii: S0022-3913(20)30416.
    >> Share

  489. MAI HY, Lee WK, Kwon TG, Lee DH, et al
    Reliability of digital measurement methods on the marginal fit of fixed prostheses: A systematic review and meta-analysis of in vitro studies.
    J Prosthet Dent. 2020;124:350.
    >> Share

  490. CHOI YD, Lee KE, Mai HN, Lee DH, et al
    Effects of scan body exposure and operator on the accuracy of image matching of implant impressions with scan bodies.
    J Prosthet Dent. 2020;124:379.
    >> Share

  491. HUANG YF, Liu SP, Muo CH, Chang CT, et al
    Prosthetic design related to peri-implant bone resorption in microvascular free fibular flap among patients with oral cancer: A retrospective clinical study.
    J Prosthet Dent. 2020;124:395-399.
    >> Share

  492. HESS TA, Ramos V Jr, Buglione D
    A technique to guide replacement of multiunit abutments supporting an existing implant-supported fixed complete denture.
    J Prosthet Dent. 2020;124:270-273.
    >> Share

  493. DIEZ-QUIJANO C, Azevedo L, Antonaya-Martin JL, Del Rio-Highsmith J, et al
    Evaluation of the clinical behavior of 2 different materials for implant-supported interim fixed partial prostheses: A randomized clinical trial.
    J Prosthet Dent. 2020;124:351-356.
    >> Share

  494. LI J, Chen Z, Dong B, Wang HL, et al
    A digital workflow with computer-assisted implant planning for fabricating an impression splinting framework and custom tray for multiple implants.
    J Prosthet Dent. 2020;124:262-269.
    >> Share

    August 2020
  495. VISSER A, Noorda WD, Linde A, Raghoebar GM, et al
    Bar-clip versus magnet-retained auricular prostheses: A prospective clinical study with a 3-year follow-up.
    J Prosthet Dent. 2020;124:240-247.
    >> Share

  496. QUEIROZ DA, Hagee N, Lee DJ, Zheng F, et al
    The behavior of a zirconia or metal abutment on the implant-abutment interface during cyclic loading.
    J Prosthet Dent. 2020;124:211-216.
    >> Share

  497. BIDRA AS
    Application of the palatogram technique to improve speech with complete-arch fixed implant-supported zirconia prostheses.
    J Prosthet Dent. 2020;124:140-143.
    >> Share

  498. REVILLA-LEON M, Fogarty R, Barrington JJ, Zandinejad A, et al
    Influence of scan body design and digital implant analogs on implant replica position in additively manufactured casts.
    J Prosthet Dent. 2020;124:202-210.
    >> Share

  499. YUE Q, Yilmaz B, Abou-Ayash S, Zimmermann P, et al
    Use of an attachment system with angulated abutments and polyetheretherketone inserts to retain a maxillary overdenture: A clinical report.
    J Prosthet Dent. 2020;124:129-134.
    >> Share

  500. LIU W, Zhang X, Qing H, Wang J, et al
    Effect of LOCATOR attachments with different retentive forces on the stability of 2-implant-retained mandibular overdenture.
    J Prosthet Dent. 2020;124:224-229.
    >> Share

  501. LINSLEY CS, Chesnot P, Shah KC, Wu BM, et al
    Evaluation of the wear and retention performance of a shape-memory alloy abutment system after 6 months of clinical use.
    J Prosthet Dent. 2020;124:189-194.
    >> Share

  502. GOMEZ-POLO M, Ballesteros J, Perales-Padilla P, Perales-Pulido P, et al
    Guided implant scanning: A procedure for improving the accuracy of implant-supported complete-arch fixed dental prostheses.
    J Prosthet Dent. 2020;124:135-139.
    >> Share

  503. WULFMAN C, Naveau A, Rignon-Bret C
    Digital scanning for complete-arch implant-supported restorations: A systematic review.
    J Prosthet Dent. 2020;124:161-167.
    >> Share

  504. KIM T, Lee S, Kim GB, Hong D, et al
    Accuracy of a simplified 3D-printed implant surgical guide.
    J Prosthet Dent. 2020;124:195-201.
    >> Share

  505. KHER U, Patil PG, Tunkiwala A, Advani P, et al
    A technique for registering the peri-implant soft-tissue profile with an interim restoration.
    J Prosthet Dent. 2020;124:248-249.
    >> Share

    July 2020
  506. SIVAKUMAR I, Arunachalam S, Choudhary S, Buzayan MM, et al
    Does HIV infection affect the survival of dental implants? A systematic review and meta-analysis.
    J Prosthet Dent. 2020 Jul 18. pii: S0022-3913(20)30252.
    >> Share

  507. ELSAYYAD AA, Abbas NA, AbdelNabi NM, Osman RB, et al
    Biomechanics of 3-implant-supported and 4-implant-supported mandibular screw-retained prostheses: A 3D finite element analysis study.
    J Prosthet Dent. 2020;124:68.
    >> Share

  508. ZHENG F, Chee WW
    Stereographic analog application in implant-supported complete rehabilitation: A dental technique.
    J Prosthet Dent. 2020;124:14-18.
    >> Share

  509. HU ML, Lin H, Zhang YD, Han JM, et al
    Comparison of technical, biological, and esthetic parameters of ceramic and metal-ceramic implant-supported fixed dental prostheses: A systematic review and meta-analysis.
    J Prosthet Dent. 2020;124:26-35.
    >> Share

  510. POLLINI A, Morton D, Arunyanak SP, Harris BT, et al
    Evaluation of esthetic parameters related to a single implant restoration by laypeople and dentists.
    J Prosthet Dent. 2020;124:94-99.
    >> Share

  511. ESQUIVEL J, Pineyro A
    Dual-space technique for creating cement space in a cementation device for implant dentistry: A predictable chairside approach.
    J Prosthet Dent. 2020;124:19-22.
    >> Share

  512. CARNEIRO-CAMPOS LE, Freitas-Fernandes LB, Masterson D, Magno MB, et al
    Does the natural maxillary dentition influence the survival rate of mandibular metal-resin implant-supported fixed complete dentures? A systematic review and meta-analysis.
    J Prosthet Dent. 2020;124:36-45.
    >> Share

  513. CHOU JC
    Technique for using an implant driver and tether system.
    J Prosthet Dent. 2020;124:23-25.
    >> Share

  514. AGUSTIN-PANADERO R, Soriano-Valero S, Labaig-Rueda C, Fernandez-Estevan L, et al
    Implant-supported metal-ceramic and resin-modified ceramic crowns: A 5-year prospective clinical study.
    J Prosthet Dent. 2020;124:46-52.
    >> Share

    June 2020
  515. SIU ASC, Chow JKF, Au Yeung BHC, Linsley CS, et al
    Treating an edentulous mandible with an implant-supported prosthesis with a shape-memory alloy abutment system.
    J Prosthet Dent. 2020;123:775-780.
    >> Share

  516. FRASER D, Funkenbusch P, Ercoli C, Meirelles L, et al
    Biomechanical analysis of the osseointegration of porous tantalum implants.
    J Prosthet Dent. 2020;123:811-820.
    >> Share

  517. YEUNG M, Abdulmajeed A, Carrico CK, Deeb GR, et al
    Accuracy and precision of 3D-printed implant surgical guides with different implant systems: An in vitro study.
    J Prosthet Dent. 2020;123:821-828.
    >> Share

  518. PARK SM, Park S, Shin S, Lee H, et al
    Designing a mandibular advancement device with topology optimization for a partially edentulous patient.
    J Prosthet Dent. 2020;123:850-859.
    >> Share

  519. PINHATA-BAPTISTA OH, Goncalves RN, Gialain IO, Cavalcanti MGP, et al
    Three dimensionally printed surgical guides for removing fixation screws from onlay bone grafts in flapless implant surgeries.
    J Prosthet Dent. 2020;123:791-794.
    >> Share

    May 2020
  520. LIU Y, Tang C
    Interdisciplinary treatment with implant-supported prostheses for an adolescent with ectodermal dysplasia: A clinical report.
    J Prosthet Dent. 2020;123:655-660.
    >> Share

  521. KAPOOR S, Singh SV, Arya D, Chand P, et al
    Technique to prevent fracture of a partial auricular prosthesis mold.
    J Prosthet Dent. 2020;123:769-771.
    >> Share

  522. PARK SG, Kim M, Yoo JJ, Yoon JH, et al
    Application of the functionally generated path technique in designing an implant-supported fixed prosthesis with CAD-CAM technology: A dental technique.
    J Prosthet Dent. 2020;123:667-670.
    >> Share

  523. CONEJO J, Atria PJ, Hirata R, Blatz MB, et al
    Copy milling to duplicate the emergence profile for implant-supported restorations.
    J Prosthet Dent. 2020;123:671-674.
    >> Share

  524. PATIL PG, Seow LL
    Crestal bone-level changes and patient satisfaction with mandibular overdentures retained by one or two implants with immediate loading protocols: A randomized controlled clinical study.
    J Prosthet Dent. 2020;123:710-716.
    >> Share

  525. PRAVEEN G, Chaithanya R, Alla RK, Shammas M, et al
    The 100 most cited articles in prosthodontic journals: A bibliometric analysis of articles published between 1951 and 2019.
    J Prosthet Dent. 2020;123:724-730.
    >> Share

  526. ROCCUZZO A, Jensen SS, Worsaae N, Gotfredsen K, et al
    Implant-supported 2-unit cantilevers compared with single crowns on adjacent implants: A comparative retrospective case series.
    J Prosthet Dent. 2020;123:717-723.
    >> Share

  527. AN X, Chui Z, Yang HW, Choi BH, et al
    Digital workflow for fabricating an overdenture by using an implant surgical template and intraoral scanner.
    J Prosthet Dent. 2020;123:675-679.
    >> Share

  528. SHAO J, Li L
    Complete-arch implant impression technique for capturing the acquired soft-tissue profile.
    J Prosthet Dent. 2020;123:772-774.
    >> Share

    April 2020
  529. WRIGHT RA, Bidra AS, Kuo CL
    An analysis of anterior mandibular anatomy by using cone beam computed tomography: A study of 225 mandibular images.
    J Prosthet Dent. 2020;123:595-601.
    >> Share

  530. GONCALVES F, Campestrini VLL, Rigo-Rodrigues MA, Zanardi PR, et al
    Effect of the attachment system on the biomechanical and clinical performance of overdentures: A systematic review.
    J Prosthet Dent. 2020;123:589-594.
    >> Share

  531. KOIKE T, Kubo K, Kono T, Ueda T, et al
    Retention force and allowable range of the angle of an implant-supported overdenture attachment system using healing screws and a silicone resilient denture liner.
    J Prosthet Dent. 2020;123:630-634.
    >> Share

  532. YEUNG S, Parminter P, Goto Y, Aghivinian C, et al
    A CAD-CAM approach for designing and fabricating a periodontal prosthesis: A clinical report.
    J Prosthet Dent. 2020;123:553-556.
    >> Share

  533. DEGIDI M, Nardi D, Sighinolfi G, Degidi D, et al
    The conometric concept for the definitive rehabilitation of a single posterior implant by using a conical indexed abutment: A technique.
    J Prosthet Dent. 2020;123:576-579.
    >> Share

  534. DOLIVEUX S, Jamjoom FZ, Nadra M, Gallucci GO, et al
    Fabrication technique for a custom implant emergence profile on 3D printed casts.
    J Prosthet Dent. 2020;123:571-575.
    >> Share

  535. KOOSHA S, Toraji S, Mostafavi AS
    Effect of fluid contamination on the reverse torque values of abutment screws at implant-abutment connections.
    J Prosthet Dent. 2020;123:618-621.
    >> Share

    March 2020
  536. BATAK B, Yilmaz B, Shah K, Rathi R, et al
    Effect of coded healing abutment height and position on the trueness of digital intraoral implant scans.
    J Prosthet Dent. 2020;123:466-472.
    >> Share

  537. AFRASHTEHFAR KI, Del Fabbro M
    Clinical performance of zirconia implants: A meta-review.
    J Prosthet Dent. 2020;123:419-426.
    >> Share

  538. WADHWANI CPK, O'Brien R, Rosen PS, Chung KH, et al
    Testing and calibrating the mechanical-type toggle torque wrenches used in implant dentistry: A dental technique.
    J Prosthet Dent. 2020;123:403-407.
    >> Share

  539. YILMAZ B, Schimmel M, McGlumphy E
    Rescue of an implant-supported fixed complete prosthesis after the failure of an implant: A dental technique.
    J Prosthet Dent. 2020;123:398-402.
    >> Share

  540. LIN YT, Shen YF, Wei PC, Hsu KW, et al
    Clinical evaluation of two-piece zirconia abutments with bonded titanium inserts for implant-supported restorations.
    J Prosthet Dent. 2020;123:449-454.
    >> Share

  541. OPLER R, Wadhwani C, Chung KH
    The effect of screwdriver angle variation on the off-axis implant abutment system and hexalobular screw.
    J Prosthet Dent. 2020;123:524-528.
    >> Share

  542. SRIVASTAVA A, Bidra AS
    Milled cobalt-chromium metal framework with veneered porcelain for a complete-arch fixed implant-supported prosthesis: A clinical report.
    J Prosthet Dent. 2020;123:367-372.
    >> Share

  543. SHAH K, Lee DJ
    Fabricating a screw-retained, complete arch, fixed implant prosthesis using selective metal laser sintering: A clinical report.
    J Prosthet Dent. 2020;123:373-378.
    >> Share

  544. MALPARTIDA-CARRILLO V, Tinedo-Lopez PL, Ortiz-Culca F, Guerrero ME, et al
    Techniques for retrievability and for registering screw access holes in cement-retained implant-supported prostheses: A scoping review of the literature.
    J Prosthet Dent. 2020;123:427-433.
    >> Share

  545. KIM JE, Lee JS, Kim JH, Shim JS, et al
    Digital approach for production of interim implant-supported fixed restoration with a prefabricated implant component library.
    J Prosthet Dent. 2020;123:384-388.
    >> Share

  546. KIM JE, Lee JS, Shin SH, Shim JS, et al
    A generation process for a three-dimensional digital cast that simulates the oral cavity by using an existing maxillary obturator.
    J Prosthet Dent. 2020;123:531-534.
    >> Share

    February 2020
  547. SAGHIRI MA, Asatourian A, Kazerani H, Gutmann JL, et al
    Effect of thermocycling on the surface texture and release of titanium particles from titanium alloy (Ti6Al4V) plates and dental implants: An in vitro study.
    J Prosthet Dent. 2020 Feb 6. pii: S0022-3913(19)30750.
    >> Share

  548. DUVALL NB
    Fabricating a chairside CAD-CAM radiographic and surgical guide for dental implants: A dental technique.
    J Prosthet Dent. 2020 Feb 3. pii: S0022-3913(19)30757.
    >> Share

  549. SUN B, Li Y, Wang Y, Zhou Q, et al
    Adhesion properties of modified cement-retained implant prostheses: In vitro mechanical tensile experiments and computational fluid dynamics analyses.
    J Prosthet Dent. 2020;123:290.
    >> Share

  550. YILMAZ B, Abou-Ayash S
    A digital intraoral implant scan technique using a combined healing abutment and scan body system.
    J Prosthet Dent. 2020;123:206-209.
    >> Share

  551. CANULLO L, Menini M, Covani U, Pesce P, et al
    Clinical outcomes of using a prosthetic protocol to rehabilitate tissue-level implants with a convergent collar in the esthetic zone: A 3-year prospective study.
    J Prosthet Dent. 2020;123:246-251.
    >> Share

  552. SHAH KC, Linsley CS, Wu BM
    Evaluation of a shape memory implant abutment system: An up to 6-month pilot clinical study.
    J Prosthet Dent. 2020;123:257-263.
    >> Share

  553. CANALLATOS JE, Hobbs GR, Bryington MS, Dye BD, et al
    The effect of implant prosthesis complications on patient satisfaction.
    J Prosthet Dent. 2020;123:269-276.
    >> Share

  554. YILMAZ B, Ozkir E, Johnston WM, McGlumphy E, et al
    Dislodgement force analysis of an overdenture attachment system.
    J Prosthet Dent. 2020;123:291-298.
    >> Share

  555. SASADA Y, Huynh-Ba G, Funakoshi E
    Transferring subgingival contours around implants and the intaglio surface of the pontic to definitive digital casts by using an intraoral scanner: A technique.
    J Prosthet Dent. 2020;123:210-214.
    >> Share

  556. DE ANGELIS P, Passarelli PC, Gasparini G, Boniello R, et al
    Monolithic CAD-CAM lithium disilicate versus monolithic CAD-CAM zirconia for single implant-supported posterior crowns using a digital workflow: A 3-year cross-sectional retrospective study.
    J Prosthet Dent. 2020;123:252-256.
    >> Share

  557. MIZUMOTO RM, Malamis D, Mascarenhas F, Tatakis DN, et al
    Titanium implant wear from a zirconia custom abutment: A clinical report.
    J Prosthet Dent. 2020;123:201-205.
    >> Share

  558. HAAS RC, Haas SE
    Cement shield membrane technique to minimize residual cement on implant crowns: A dental technique.
    J Prosthet Dent. 2020;123:223-227.
    >> Share

    January 2020
  559. LEE JH
    A completely digital approach to scanning dental implants placed in a limited space or with an adverse angulation.
    J Prosthet Dent. 2020 Jan 7. pii: S0022-3913(19)30696.
    >> Share

  560. JOSHI AA, Gaikwad AM, Nadgere JB, Ram SM, et al
    Orthodontic elastomeric chain as an alternative to dental floss for splinting implant impression copings for complete-arch implant impressions.
    J Prosthet Dent. 2020;123:188-189.
    >> Share

  561. LIN WS, Yang CC, Polido WD, Morton D, et al
    CAD-CAM cobalt-chromium surgical template for static computer-aided implant surgery: A dental technique.
    J Prosthet Dent. 2020;123:42-44.
    >> Share

  562. ALQARNI H, AlHelal A, Kattadiyil MT, Goodacre CJ, et al
    Selective implant scan body modification to restore severely tilted adjacent implants: A completely digital workflow.
    J Prosthet Dent. 2020;123:38-41.
    >> Share

  563. PAPAZOGLOU E, Wee AG, Carr AB, Urban I, et al
    Accuracy of complete-arch implant impression made with occlusal registration material.
    J Prosthet Dent. 2020;123:143-148.
    >> Share

  564. LUO Q, Ding Q, Zhang L, Xie Q, et al
    Analyzing the occlusion variation of single posterior implant-supported fixed prostheses by using the T-scan system: A prospective 3-year follow-up study.
    J Prosthet Dent. 2020;123:79-84.
    >> Share

  565. CHOI JW, Lee JJ, Bae EB, Huh JB, et al
    Implant-supported fixed dental prosthesis with a microlocking implant prosthetic system: A clinical report.
    J Prosthet Dent. 2020;123:15-19.
    >> Share

  566. MIZUMOTO RM, Yilmaz B, McGlumphy EA Jr, Seidt J, et al
    Accuracy of different digital scanning techniques and scan bodies for complete-arch implant-supported prostheses.
    J Prosthet Dent. 2020;123:96-104.
    >> Share

    December 2019
  567. RIGOLIN MSM, Barbugli PA, Jorge JH, Reis MRD, et al
    Effect of the aging of titanium and zirconia abutment surfaces on the viability, adhesion, and proliferation of cells and the adhesion of microorganisms.
    J Prosthet Dent. 2019;122:564.
    >> Share

    November 2019
  568. KHALAILA W, Nasser M, Ormianer Z
    Evaluation of the relationship between Periotest values, marginal bone loss, and stability of single dental implants: A 3-year prospective study.
    J Prosthet Dent. 2019 Nov 25. pii: S0022-3913(19)30587.
    >> Share

  569. DOS SANTOS LCP, Malheiros FC, Guarato AZ
    Surface parameters of as-built additive manufactured metal for intraosseous dental implants.
    J Prosthet Dent. 2019 Nov 20. pii: S0022-3913(19)30602.
    >> Share

  570. JUNG WK, Lee WS, Kwon HB
    Effects of abutment screw preload in two implant connection systems: A 3D finite element study.
    J Prosthet Dent. 2019;122:474.
    >> Share

  571. KONG N, Chen A, Yan W, Zhang H, et al
    Ceramic implant fracture: A clinical report.
    J Prosthet Dent. 2019;122:425-429.
    >> Share

  572. PAPASPYRIDAKOS P, Bordin TB, Natto ZS, El-Rafie K, et al
    Complications and survival rates of 55 metal-ceramic implant-supported fixed complete-arch prostheses: A cohort study with mean 5-year follow-up.
    J Prosthet Dent. 2019;122:441-449.
    >> Share

  573. CHLOE M, Marie-Violaine B
    Impression for an immediate denture with mobile teeth: A clinical approach.
    J Prosthet Dent. 2019;122:498-499.
    >> Share

    October 2019
  574. WOLFART S, Yilmaz B
    A technique for facilitating open-tray implant impressions.
    J Prosthet Dent. 2019;122:417-419.
    >> Share

  575. AGUSTIN-PANADERO R, Serra-Pastor B, Penarrocha-Oltra D, Ferreiroa A, et al
    Digital scanning for implant-supported fixed complete-arch dental prostheses for patients with epidermolysis bullosa: A case series evaluation.
    J Prosthet Dent. 2019;122:364-370.
    >> Share

    September 2019
  576. BIDRA AS, Persenaire MJ, Natarajan E
    Management of peripheral giant cell granuloma around complete-arch fixed implant-supported prosthesis: A case series.
    J Prosthet Dent. 2019;122:181-188.
    >> Share

  577. ANADIOTI E, Gates WD 3rd, Elpers J, De Kok IJ, et al
    Retrospective cohort analysis of maxillary overdentures retained by unsplinted implants.
    J Prosthet Dent. 2019;122:301-308.
    >> Share

  578. NOHARET R, Van Dooren E
    Combination of cone beam computed tomography and CAD-CAM techniques for maintaining natural emergence profile in immediate extraction and/or implant placement and restoration of a central incisor: A dental technique.
    J Prosthet Dent. 2019;122:193-197.
    >> Share

  579. LI J, Chen Z, Wang M, Wang HL, et al
    Dynamic changes of peri-implant soft tissue after interim restoration removal during a digital intraoral scan.
    J Prosthet Dent. 2019;122:288-294.
    >> Share

  580. SOLA-RUIZ MF, Marti-Marti B, Rech-Ortega C, Fernandez-Estevan L, et al
    Influence on peri-implant bone loss of different fixed partial dentures retained on 2 implants.
    J Prosthet Dent. 2019;122:295-300.
    >> Share

    August 2019
  581. HU S, Duan L, Wan Q, Wang J, et al
    An evaluation of fluid distribution at the implant site during implant placement by using a computational fluid dynamics model.
    J Prosthet Dent. 2019;122:142.
    >> Share

  582. MAJCHROWICZ M
    Spongy floss impregnated with light-polymerizing gel to splint implant impression posts.
    J Prosthet Dent. 2019;122:176-177.
    >> Share

  583. WANG L, Wang T, Lu Y, Fan Z, et al
    A digital approach for 1-step formation of the supraimplant emergence profile at the time of immediate implant placement.
    J Prosthet Dent. 2019;122:104-107.
    >> Share

  584. FRENCH D, Naito M, Linke B
    Interproximal contact loss in a retrospective cross-sectional study of 4325 implants: Distribution and incidence and the effect on bone loss and peri-implant soft tissue.
    J Prosthet Dent. 2019;122:108-114.
    >> Share

    July 2019
  585. REIS TAD, Zancope K, Karam FK, Neves FDD, et al
    Biomechanical behavior of extra-narrow implants after fatigue and pull-out tests.
    J Prosthet Dent. 2019;122:54.
    >> Share

  586. CHEN Z, Lin CY, Li J, Wang HL, et al
    Influence of abutment height on peri-implant marginal bone loss: A systematic review and meta-analysis.
    J Prosthet Dent. 2019;122:14-21.
    >> Share

    June 2019
  587. BERNARD L, Vercruyssen M, Duyck J, Jacobs R, et al
    A randomized controlled clinical trial comparing guided with nonguided implant placement: A 3-year follow-up of implant-centered outcomes.
    J Prosthet Dent. 2019;121:904-910.
    >> Share

    May 2019
  588. BERGER G, Pereira LFO, Souza EM, Rached RN, et al
    A 3D finite element analysis of glass fiber reinforcement designs on the stress of an implant-supported overdenture.
    J Prosthet Dent. 2019;121:865.
    >> Share

    March 2019
  589. BULAQI HA, Barzegar A, Paknejad M, Safari H, et al
    Assessment of preload, remaining torque, and removal torque in abutment screws under different frictional conditions: A finite element analysis.
    J Prosthet Dent. 2019;121:548.
    >> Share


Free Medical Abstracts
Privacy Policy
Sponsors
Share

© Amedeo 1997-2016